TP-Link Archer C55 Archer C55EU V1 Quick Installation Guide - Page 1
TP-Link Archer C55 Manual
View all TP-Link Archer C55 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Quick Installation Guide Wireless Dual Band Router Connect the Hardware If your internet connection is through an Ethernet cable directly from the wall instead of through a DSL / Cable / Satellite modem, connect the Ethernet cable to the router's Internet port, then follow steps 4 and 5 to complete the hardware connection. Internet Power adapter Modem Router 1 Turn off the modem, and remove the backup battery if it has one. 2 Connect the modem to the router's Internet port with an Ethernet cable. 3 Turn on the modem, and then wait about 2 minutes for it to restart. Power adapter 4 Connect the power adapter to the router and turn on the router. 5 Verify that the following LEDs stay on to confirm the hardware is connected correctly. Power 2.4GHz 5GHz Internet On On On On Note: If the 2.4GHz and 5GHz LEDs are off, press and hold the Wi-Fi On/Off button on the rear panel for about 2 seconds to turn them on.