TP-Link Archer C58 Archer C58EU V1 User Guide - Page 59
How can, I do that?, Network, Advanced Routing, Network Destination, Subnet Mask, Default Gateway
View all TP-Link Archer C58 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Chapter 11 How can I do that? Customize Your Network Settings 1. Change the router's LAN IP addresses to two different IP addresses on the same subnet. Disable Router 2's DHCP function. 2. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 3. Go to Network > Advanced Routing. 4. Click Add and finish the settings according to the following explanations: Network Destination: The destination IP address that you want to assign to a static route. This IP address cannot be on the same subnet with the WAN IP or LAN IP of the router. In the example, the IP address of the company network is the destination IP address, so here enter 172.30.30.1. Subnet Mask: Determines the destination network with the destination IP address. If the destination is a single IP address, enter 255.255.255.255; otherwise, enter the subnet mask of the corresponding network IP. In the example, the destination network is a single IP, so here enter 255.255.255.255. Default Gateway: The IP address of the gateway device to which the data packets will be sent. This IP address must be on the same subnet with the router's IP which sends out data. In the example, the data packets will be sent to the LAN port of Router 2 and then to the Server, so the default gateway should be 192.168.0.2. 56