TP-Link Archer C90 Archer C90US V6 User Guide - Page 13
Smart Device, Computer, Method 1: Wired, Method 2: Wirelessly, Method 3: Use the WPS button
![]() |
View all TP-Link Archer C90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Chapter 2 Connect the Hardware 5. Verify that the following LEDs are on and solid to confirm the hardware is connected correctly. Power On 2.4G On 5G Internet On On Note: If the 2.4G LED and 5G LED are off, press and hold the WPS/Wi-Fi button on the back for more than 2 seconds. Both the LEDs should turn solid on. 6. Connect your computer to the router. • Method 1: Wired Turn off the Wi-Fi on your computer and connect the devices as shown below. Ethernet cable • Method 2: Wirelessly 1 ) Find the SSID (Network Name) and Wireless Password printed on the label at the bottom of the router. 2 ) Click the network icon of your computer or go to Wi-Fi Settings of your smart device, and then select the SSID to join the network. Computer Connections are available Wireless Network Connection TP-Link_XXXX TP-Link_XXXX_5G √ Connect automatically Connect Smart Device < Settings Wi-Fi Wi-Fi CHOOSE A NETWORK... TP-Link_XXXX TP-Link_XXXX_5G Other... • Method 3: Use the WPS button Wireless devices that support WPS, including Android phones, tablets, and most USB network cards, can be connected to your router through this method. Note: • WPS is not supported by iOS devices. • The WPS function cannot be configured if the wireless function of the router is disabled. Also, the WPS function will be disabled if your wireless encryption is WEP. Please make sure the wireless function is enabled and is configured with the appropriate encryption before configuring the WPS. 9
![](/manual_guide/products/tplink-archer-c90-archer-c90us-v6-user-guide-324b08c/13.png)