TP-Link Archer D20 Archer D20 V1 Quick Install Guide
TP-Link Archer D20 Manual
 |
View all TP-Link Archer D20 manuals
Add to My Manuals
Save this manual to your list of manuals |
TP-Link Archer D20 manual content summary:
- TP-Link Archer D20 | Archer D20 V1 Quick Install Guide - Page 1
Quick Installation Guide AC750 Wireless Dual Band ADSL2+ Modem Router 7106505550 REV1.0.2 Connecting the Hardware If you don't need the phone service, just directly connect the modem router to the phone jack with a phone cable, then follow steps 3 and 4 to complete the hardware connection. Phone - TP-Link Archer D20 | Archer D20 V1 Quick Install Guide - Page 2
click Next. Follow the step-by-step instructions of the Quick Setup to complete the initial con guration. Note: For advanced settings, please refer to the User Guide on TP-LINK official website at www.tp-link.com. USB Sharing Port Remote Access via FTP Server Media Sharing Local Storage Sharing
-
1 -
2
 |
 |
Verify that the hardware connection
is correct by checking these LEDs.
4
Note:
1. The ADSL LED
takes about 1 to 2 minutes to stabilize.
2. If the 2.4GHz LED
and 5GHz LED
are off, please press the Wi-Fi
button on the rear panel for 2 seconds, then check the LEDs again in a
few seconds.
Power On
On
5GHz
On
2.4GHz
On
ADSL
Quick Installation Guide
7106505550
REV1.0.2
Connecting the Hardware
ADSL Splitter
Phone Jack
Connect to the phone (Optional)
2
Connect the modem router to the
ADSL splitter.
3
Turn on the modem router.
Power Adapter
If you don’t need the phone service, just directly connect the modem router to
the phone jack with a phone cable, then follow steps 3 and 4 to complete the
hardware connection.
1
Connect the ADSL splitter
to the phone jack
.
Modem Router
AC750 Wireless Dual Band
ADSL2+ Modem Router