TP-Link Archer D20 Archer D20 V1 Quick Install Guide - Page 1

TP-Link Archer D20 Manual

Get TP-Link Archer D20 PDF manuals and user guides View all TP-Link Archer D20 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 1 highlights

Quick Installation Guide AC750 Wireless Dual Band ADSL2+ Modem Router 7106505550 REV1.0.2 Connecting the Hardware If you don't need the phone service, just directly connect the modem router to the phone jack with a phone cable, then follow steps 3 and 4 to complete the hardware connection. Phone Jack 1 Connect the ADSL splitter to the phone jack Modem Router ADSL Splitter 2 Connect the modem router to the ADSL splitter. Connect to the phone (Optional) Power Adapter 3 Turn on the modem router. 4 Verify that the hardware connection is correct by checking these LEDs. Power On ADSL On 2.4GHz On 5GHz On Note: 1. The ADSL LED takes about 1 to 2 minutes to stabilize. 2. If the 2.4GHz LED and 5GHz LED are off, please press the Wi-Fi button on the rear panel for 2 seconds, then check the LEDs again in a few seconds.

  • 1
  • 2
Verify that the hardware connection
is correct by checking these LEDs.
4
Note:
1. The ADSL LED
takes about 1 to 2 minutes to stabilize.
2. If the 2.4GHz LED
and 5GHz LED
are off, please press the Wi-Fi
button on the rear panel for 2 seconds, then check the LEDs again in a
few seconds.
Power On
On
5GHz
On
2.4GHz
On
ADSL
Quick Installation Guide
7106505550
REV1.0.2
Connecting the Hardware
ADSL Splitter
Phone Jack
Connect to the phone (Optional)
2
Connect the modem router to the
ADSL splitter.
3
Turn on the modem router.
Power Adapter
If you don’t need the phone service, just directly connect the modem router to
the phone jack with a phone cable, then follow steps 3 and 4 to complete the
hardware connection.
1
Connect the ADSL splitter
to the phone jack
.
Modem Router
AC750 Wireless Dual Band
ADSL2+ Modem Router