TP-Link Archer D9 Archer D9 V1 Quick Install Guide.
TP-Link Archer D9 Manual
 |
View all TP-Link Archer D9 manuals
Add to My Manuals
Save this manual to your list of manuals |
TP-Link Archer D9 manual content summary:
- TP-Link Archer D9 | Archer D9 V1 Quick Install Guide. - Page 1
POWER POWER ON/OFF Ethernet cable Wireless Connect wirelessly by using the default network name Or (SSID) and password on the product label printed on the bottom of the modem router. Model:Archer D9 S/No.:XXXXXXXXXXXXX MAC:XXXXXXXXXXXX ver:1.0 Wireless Password /PIN 2 Open a web browser on the - TP-Link Archer D9 | Archer D9 V1 Quick Install Guide. - Page 2
back of the modem router. A2. If you have changed your password, log on to the modem router's Web Management page, go to Wireless>Wireless Security to obtain or reset your password. Note: If your questions are not answered here, please refer to http://www.tp-link.com/en/support/faq and click Contact
-
1 -
2
 |
 |
Quick
Installation Guide
Open a web browser on the computer and configure the modem router according to the following main clues.
Via Web Browser
Method 1
2. Configuring the Modem Router
1. Connecting the Hardware
7106505166
REV1.0.2
AC1900 Wireless Dual Band Gigabit
ADSL2+ Modem Router
Note: If you don’t need the phone service, just directly connect the ADSL port to the Phone Jack with a phone cable.
Note: Please wait for 1-2 minutes until the ADSL LED is on.
Enter
http://tplinkmodem.net
or
192.168.1.1
in
the address bar. Type in
admin
for both the user
name and password and click
OK
.
Note: If the login window does not appear, please refer to
FAQ->Q1.
Enter the parameters provided by your ISP and then
click
Next
. Here we take
PPPoE
as an example.
a
C
f
e
d
Select
Yes
to auto detect your connection type and then click
Next
to continue.
b
Choose
Quick Setup
in the main menu and then click
Next
to start the configuration. Select your
Region
and
Time Zone
from the drop-down list, and then click
Next
.
Click
Next
to continue.
Wireless Network Name:
Password:
TP-LINK_XXGHz_XXXXXX
XXXXXXXX
Quick Setup-Wireless 2.4GHz & 5GHz
Back
Next
Channel:
Mode:
Security:
Note: You may rename your 2.4GHz/ 5GHz wireless network name and create
your own password.
Back
Next
XXXXXX
XXXXXX
XXXXXX
Quick Setup-PPPoE
DSL PVC:
Auto-detection has succeeded!
8/35
Encapsulation Mode:
LLC
Connection Type:
PPPoE
Username:
Password:
Confirm Password:
Click
Save
and wait for your settings to take effect. Click
Finish
to complete the setup.
Finish
Quick Setup-Complete
Operation Mode Configuring:
Success
WAN Connection Configuring:
Success
Gateway and DNS Configuring:
Success
Wireless Configuring:
Success
Time Zone Configuring:
Success
Region
Back
Next
Quick Setup-Region and Time Zone
XXXXXX
XXXXXXXXXX
Time Zone
Back
Next
Quick Setup-Auto Detection
Yes.
No. I want to configure the Internet connection myself.
Auto-Detect Connection Type:
Enjoy!
Now your wired and
wireless devices can
connect to the Internet !
Connect the splitter, computer and power adapter as follows. Then turn on the modem router.
Check the following LED lights to ensure
the hardware connection is correct.
1
2
Power
On
On
ADSL
On
LAN
Splitter
Phone Jack
USB 3.0
ADSL
POWER
POWER
ON/OFF
WPS
WiFi
ON/OFF
LAN1
LAN2
LAN3
LAN4/WAN
Wired
Connect your computer to the modem router (Wired or Wireless).
Or
Wireless
1
Ethernet cable
Connect wirelessly by using
the default network name
(SSID) and password on the
product label printed on the
bottom of the modem
router.
USB 3.0
POWER
POWER
ON/OFF
LAN1
LAN2
LAN3
LAN4/WAN
Model:Archer D9
ver:1.0
S/No.:XXXXXXXXXXXXX
MAC:XXXXXXXXXXXX
2
Login
http://tplinkmodem.net
admin
admin