TP-Link Archer T2UHP Archer T2UHPUN V1 Quick Install Guide - Page 2

For Windows 1 Connect to a Computer Connect the adapter to a USB port on your computer using the USB cable provided. This USB Adapter can only be powered by computers that comply with Limited Power Source (LPS) Note: In Windows XP, a Found New Hardware Wizard window will appear when the adapter is detected. Please click Cancel. 2 Install Driver and Utility 3 Join a Wireless Network a. Insert the CD and run the Autorun.exe from the pop-up Autoplay window. Notes: 1. You can also download the driver and utility at http://www.tp-link.com. 2. In some operating systems, the CD screen will pop up automatically. Otherwise, run the CD manually. b. Select Archer T2UHP and click Install Driver, then follow the InstallShield Wizard to complete the installation. Note: During the installation, select TP-LINK Wireless Configuration Utility and Driver if you want to use TP-LINK Utility and WPS function. Setup Wizard Option 1: Via Windows Wireless Utility Click or (Network icon) on the task bar, select your Wi-Fi network, and click Connect. Networks Wi-Fi TP-LINK_TEST_Device TP-LINK_0001 TP-LINK_XXXX √ Connect automatically Connect Archer T2UHP Install Driver User Guide Browse CD EXIT Option 2: Via TP-LINK Utility Select your Wi-Fi network from the utility window and click Connect. The symbol indicates a successful connection. Status WPS Network Name(SSID) TP-LINK_XXXX TP-LINK_0001 TP-LINK_0903 TP-LINK_TEST_Device Network Profile Advanced Security Channel WPA/WPA2-Personal 6 (2.4G) Connect automatically Connect WPA/WPA2-Personal 2 (2.4G) None 11 (2.4G) None 36 (5G) Signal Network Na TP-LINK_XX TP-LINK_0001 Option 3: Via Wi-Fi Protected Setup (WPS) a. Press the WPS button on your router. b. Within 2 minutes, press and hold the WPS button on the adapter until the configuring screen appears. c. When you are prompted "Successfully connected to the network by WPS!", click OK. For more information, please visit our website http://www.tp-link.com ©2016 TP-LINK