TP-Link Archer VR2600 Archer VR2600 V1 Quick Install Guide - Page 1

Quick Installation Guide AC2600 Wireless Gigabit VDSL/ADSL Modem Router VR2600 7106505864 REV1.0.0 Connect the Hardware Configure the Modem Router Enjoy the Internet Power Adapter Phone Jack 3 Push in to turn on the modem router. Modem Router 4 Verify that the following LEDs are on and stable before continuing with the configuration. Power On DSL On Note: The DSL LED takes about 1 to 2 minutes to stabilize. 2 1 LINE PHONE MODEM DSL Splitter Phone Cable Phone (Optional) If you don't need the phone service, just directly connect the modem router to the phone jack with the provided phone cable, then follow steps 3 and 4 to complete the hardware connection. 1 Connecting your computer to the modem router via a wired or wireless connection Wired Ethernet Cable Wireless Connect wirelessly by using the SSID (network name) and Wireless Password printed on the product label at the bottom of the modem router. 2 Configuring the modem router via a web browser A Launch a web browser and type in http://tplinkmodem.net or 192.168.1.1. Create a new password (1-15 characters) and click Save. Note: If the login page does not appear, please refer to FAQ->Q1. http://tplinkmodem.net New Password Low Middle High Confirm Password Save B Enter the password you set and click Log in. Note: For subsequent logins, you only need to enter the password that you have set to log in. C Select your Region and Time Zone, then click Next. Then follow the step-by-step instructions of the Quick Setup to complete the initial configuration. Note: Per FCC regulations, all Wi-Fi products marketed in the U.S. must be fixed to the U.S. region only. Now you can enjoy your Internet. If you want more advanced settings, please refer to the User Guide on TP-LINK official website at www.tp-link.com.