TP-Link Archer VR600 Archer VR600 V1 Quick Install Guide - Page 1

Quick Installation Guide AC1600 Wireless Gigabit VDSL/ADSL Modem Router VR600 7106505669 REV1.0.0 Connect the Hardware Phone Jack Power Adapter DSL USB1 USB2 LAN1 LAN2 LAN3 LAN4/WAN Power 1 2 Modem Router 3 Push in to turn on the modem router. LINE PHONE MODEM DSL Splitter Phone(Optional) Phone Cable If you don't need the phone service, just directly connect the modem router to the phone jack with the provided phone cable, then follow steps 3 and 4 to complete the hardware connection. 4 Verify that the following LEDs are on and stable before continuing with the con guration. Power On DSL On Note: The DSL LED takes about 1 to 2 minutes to stabilize. 1 Connecting your computer to the modem router via a wired or wireless connection Wired Configure the Modem RouteDSrL USB1 USB2 LAN1 LAN2 LAN3 LAN4/WAN Power Ethernet Cable Wireless Connect wirelessly by using the SSID (network name) and Wireless Password printed on the product label at the bottom of the modem router. 2 Con guring the modem router via a web browser A Launch a web browser and type in http://tplinkmodem.net or 192.168.1.1. Create a new password (1-15 characters) and click Save. Note: If the login page does not appear, please refer to FAQ->Q1. http://tplinkmodem.net New Password Low Middle High Confirm Password Save B Enter the password you set and click Log in. Note: For subsequent logins, you only need to enter the password that you have set to log in. C Select your Region and Time Zone, then click Next. Follow the step-by-step instructions of the Quick Setup to complete the initial con guration. Note: Per FCC regulations, all Wi-Fi products marketed in the U.S. must be xed to the U.S. region only. Enjoy the Internet Now you can enjoy your Internet. If you want more advanced settings, please refer to the User Guide on TP-LINK o cial website at www.tp-link.com.