TP-Link Auranet EAP320 EAP Controller V2.2.3 User Guide - Page 32
SSID Name, Wireless Vlan ID, SSID Broadcast, Security Mode, WPA-Enterprise, WPA-PSK, Portal
View all TP-Link Auranet EAP320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
SSID Name Wireless Vlan ID SSID Broadcast Security Mode Portal SSID Isolation Access Control Enter a SSID name contains up to 32 characters. Set a VLAN ID for the wireless network. Wireless networks with the same VLAN ID are grouped to a VLAN. The value ranges from 0 to 4094. 0 means VLAN function is disabled. With the option enabled, EAPs will broadcast the SSID to the nearby hosts, so that those hosts can find the wireless network identified by this SSID. If this option is disabled, users must enter the SSID manually to connect to the EAP. Enabled by default. Select the security mode of the wireless network. None: The hosts can access the wireless network without authentication. WEP/WPA-Enterprise/WPA-PSK: The hosts need to get authenticated before accessing the wireless network. For the network security, you are suggested to encrypt your wireless network. Settings vary in different security modes and the details are in the following introduction. With the option enabled, the configurations in Portal will be applied. Portal provides authentication service for the clients who just need temporary access to the wireless network, such as the customers in shopping mall and restaurant. Disabled by default. With the option enabled, the devices connected in the same SSID cannot communicate with each other. Disabled by default. Select an Access Control rule for this SSID. For more information, refer to Access Control. 27