TP-Link CPE220 CPE510 V1 UG - Page 55
Access Control, AP router, AP client router WISP Client
View all TP-Link CPE220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Chapter 5 Network Tab Blocked DoS Host List Click Blocked DoS Host List to display the blocked DoS host table including host IP and host MAC. Click Refresh to renewal the table list. Click Clear to release all the blocked hosts. If you want to release one or some of the blocked hosts, please select them and Click Unlock. Access Control The function of Access Control is available only in AP router mode and AP client router (WISP Client) mode. The function can be used to control the Internet activities of hosts in the local area network. For example, the online time limit and the specified web stations to visit can be controlled by the filtering policy. Access Control Filtering Policy Check the Enable box to use the access control function. There are two filtering policies to control the Internet activities: Allow the packets specified by any enabled access control policy to pass through the Device. The hosts listed below are allowed to access the Internet under the rules. While others are forbidden to access. Deny the packets specified by any enabled access control policy to pass through the Device. The hosts listed below are forbidden to access the Internet under the rules. While others are allowed to access. - 52 -