TP-Link CR1900 CR1900US V1 Quick Installation Guide - Page 1

Quick Installation Guide AC1900 Wireless Dual Band DOCSIS 3.0 Cable Modem Router CR1900 1 Connect the coaxial cable and power adapter to the modem router, then power on your modem router. Internet Connect the Hardware Power adapter Coaxial cable 2 Wait for about 1 minute until the following LEDs turn solid on. Notes: 1. Keep the power on at all times during this process. 2. If the Internet LED does not turn solid after about 1 minute, call your ISP's customer service. 3. If the Wireless LED is off, press the Wi-Fi ON/OFF button on the back panel, then check the LEDs again. 3 Connect your device to the modem router via a wired or wireless connection. Wired: Connect the computer to the modem router's LAN port via an Ethernet cable. Wireless: On your device, select and connect to the modem router's wireless network. The default wireless network name (SSID) and password are printed on the Information Card found in the modem router's packaging. Alternatively, you can set up a connection via the WPS button, which is on the back panel of the modem router. For more information about WPS, refer to the User Manual at http://www.tp-link.com. Ethernet cable Activate the Modem Router Enjoy the Internet 1 Get your internet service account information and the modem router's Information Card ready. Information Card Serial Number MAC Address Wi-Fi Password/PIN SSID 2 Make sure your computer is set to dynamically obtain an IP address. 3 Launch a web browser, and visit any website. You will be automatically redirected to your service provider's self-activation page. 4 Follow the on-screen instruction to activate the modem router. If you have any problem activating your modem router, please contact your Internet Service Provider (ISP). Contact information of major cable ISPs: Bright House: 1-855-222-0102 Charter: 1-888-438-2427 Cox: 1-888-556-1193 Time Warner Cable: 1-888-892-2253 The listed contact information may change. You can also find the contact information in your monthly internet service billing statement. After activating your modem router successfully, wait for about 10 minutes till these LEDs become solid on, then you can enjoy the internet. Note: If you are unable to access the internet, refer to FAQ > Q1 for instructions. If you want to customize the wireless network, please flip this piece of paper to see detailed instructions.