TP-Link LS1005G LS1005GUN V1 Installation Guide - Page 2
Frequently Asked Questions FAQ - 5 port
View all TP-Link LS1005G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Frequently Asked Questions (FAQ) Q1. The Power LED is not lit. Q2. The Link/Act LED is not lit when a device is connected to the corresponding port. The Power LED should be lit when the power system is working normally. If the Power LED is not lit, check as follows: A1: Make sure the power adapter is connected to the switch with power source properly. A2: Make sure the voltage of the power supply meets the requirements of the input voltage of the switch. A3: Make sure the power source is ON. It is recommended that you check the following items: A1: Make sure that the cable connectors are firmly plugged into the switch and the device. A2: Make sure the connected device is turned on and works normally. A3: The cable must be less than 100 meters long (328 feet). Specifications General Specifications Standard Protocol Data Transfer Rate Network Media (Cable) Interface LED Indicators Transfer Method MAC Address Learning Frame Forward Rate Wall Mountable IEEE802.3, IEEE802.3i, IEEE802.3u, IEEE802.3ab, IEEE802.3x CSMA/CD Ethernet: 10Mbps (Half Duplex), 20Mbps (Full Duplex) Fast Ethernet: 100Mbps (Half Duplex), 200Mbps (Full Duplex) Gigabit Ethernet: 2000Mbps (Full Duplex) 10Base-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 100Base-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 1000Base-T: UTP category 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 5/8 10/100/1000Mbps Auto-Negotiation RJ45 Ports Power, Link/Act LED Store-and-Forward Automatically learning, automatically aging 10Base-T: 14881pps/Port 100Base-TX: 148810pps/Port 1000Base-T: 1488095pps/Port Yes Distance Between Mounting Holes LS1005G: 38mm LS1008G: 48mm Environmental and Physical Specifications Operating Temperature 0˚C to 40˚C (32˚F to 104˚F) Operating Humidity 10% to 90%RH non-condensing Storage Humidity 5% to 90%RH non-condensing To ask questions, find answers, and communicate with TP-Link users or engineers, please visit https://community.tp-link.com to join TP-Link Community. For technical support and other information, please visit https://www.tp-link.com/support, or simply scan the QR code. If you have any suggestions or needs on the product guides, welcome to email [email protected]. Safety Information Keep the device away from water, fire, humidity or hot environments. Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us. Do not use damaged charger or USB cable to charge the device. Do not use any other chargers than those recommended. Adapter shall be installed near the equipment and shall be easily accessible. Place the device with its bottom surface downward. TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce.