TP-Link N750 TL-WDR4300 V1 User Guide 1910010838 - Page 28
Wireless Security, Quick Setup - access point
![]() |
View all TP-Link N750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
TL-WDR4300 N750 Wireless Dual Band Gigabit Router 11n only- Select only if all of your wireless clients are 802.11n. 11an mixed - Select if you are using both 802.11a and 802.11n wireless clients. Channel Width - Select any channel width from the drop-down list. The default setting is "Auto", which can adjust the channel width for your clients automatically. Channel - This field determines which operating frequency will be used. It is not necessary to change the wireless channel unless you notice interference problems with another nearby access point. If you select "Auto", then the AP will select the best channel automatically. Wireless Security Disable Security - The wireless security function can be enabled or disabled. If disabled, the wireless stations will be able to connect the Router without encryption. Enable Security (WPA-PSK/WPA2-PSK) - It's selected by default, with the default PSK password the same as the default PIN code. No Change - If you chose this option, wireless security configuration will not change! These settings are only for basic wireless parameters. For advanced settings, please refer to 4.7 Wireless 5GHz. 8. Then you will see the Finish page. If you don't make any change on the Wireless page, you will see the Finish page as shown in Figure 3-14. Click the Finish button to finish the Quick Setup. Figure 3-14 Quick Setup - Finish If there is anything changed on the Wireless page, you will see the Finish page as shown in Figure 3-15. Click the Reboot button to make your wireless configuration take effect and finish the Quick Setup. - 18 -
![](/manual_guide/products/tplink-n750-tlwdr4300-v1-user-guide-1910010838-4e33d2b/28.png)