TP-Link RE360 RE360EU V1 Quick Installation Guide - Page 1

7106506519 REV1.0.0 Quick Installation Guide Applicable Model: RE360 Note: RE360 (UK version) is used for demonstration in this QIG. Image may differ from actual products. LED Explanation Signal Solid blue: The extender is connected to your router's wireless network and is in a suitable location. Solid red: The extender is experiencing poor signal strength. Try relocating it closer to your router. Flashing blue: WPS connection is being established. Off: No wireless connection is established. Power On: The extender is on. Flashing:The extender is starting up. Off: The extender is off. 2.4GHz/5GHz On: The extender is connected to the 2.4GHz/5GHz wireless network of your host router. Off: No wireless connection has been established. Ethernet On: A powered-on device is connected to the Ethernet port. Off: No powered-on device is connected to the Ethernet port. Option ONE Quick Setup Using Your Web Browser 1 Power on Plug your extender into a power outlet next to your router. 2 Connect to the extender For Windows Users Connection are available Wireless Network Connection TP-LINK_Extender_2.4GHz TP-LINK_Extender_5GHz √ Connect automatically Connect or Wait until the Power LED is solid on. 1. Unplug the Ethernet cable from your computer (if any). 2. Click the Wi-Fi icon on the taskbar and connect to the extender's network TP-LINK_Extender_2.4GHz/5GHz. 3 Configure 1 Launch a web browser and enter http://tplinkrepeater.net or http://192.168.0.254 in the address bar. Create a password for future login attempts, and click Start. http://tplinkrepeater.net Create Password Confirm Password Start If the login window does not appear, please refer to FAQ > Q1. 2 Select your router's 2.4GHz/5GHz host network, and enter its password. Then click Next. 5GHz Host Network Summary 2.4GHz Host Network Wireless Settings Please select 2.4GHz host network or skip this network. SSID Signal MAC Address Security Your router's wireless name 30-B5-C1-33-99-76 Host 2.4GHz Password: 12345678 Next TP-LINK_123456 23-B5-C0-30-90-06 Back Other... Rescan Skip If your router does not support 5GHz wireless network, please click Skip to continue. For Mac OS X Users Wi-Fi: On Turn Wi-Fi Off TP-LINK_Extender_2.4GHz TP-LINK_Extender_5GHz Join Other Network... Create Network... Open Network Preferences... 1. Unplug the Ethernet cable from your Mac (if any). 2. Click the Wi-Fi icon in the top right corner of the screen and connect to the extender's network TP-LINK_Extender_2.4GHz/5GHz. 3 Either keep the default SSIDs or customize them for the extended networks, and then click Next. 5GHz Host Network Summary 2.4GHz Host Network Wireless Settings Extended 2.4GHz SSID: Your network name Copy Host SSID Hide SSID broadcast Note: The extended 2.4GHz password is the same as your Host password. Extended 5GHz SSID: Your network name_5G Copy Host SSID Hide SSID broadcast Note: The extended 5GHz password is the same as your Host password. Back Next 4 Verify your wireless settings and click Save. The corresponding LED(s) (2.4GHz/5GHz) should turn solid on. 4 Relocate 1 Plug in the extender about halfway between your router and the Wi-Fi dead zone. The location you choose must be within the range of the host network. 2 Wait until the Signal LED turns solid blue. If not, relocate it closer to the router to achieve better signal quality. Host Network Extended Network Blue: Suitable location Red: Too far away Enjoy! Both extended networks share the same Wi-Fi passwords as those of your host networks, but may have different wireless network names (SSIDs) if you have customized them during the configuration.