TP-Link RE600X RE500XUS V1 Quick Installation Guide - Page 2
Access Extender Settings - ax1800
View all TP-Link RE600X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Access Extender Settings After setup, you can access extender settings via any of the methods below. You can reselect host network, change extended network settings and more. Note: If your extender and router use the same network name, Method 1 is recommended. Method 1: Via the Tether App 1. Connect your smartphone to the extender's or router's network. 2. Launch the Tether app, select your extender, and log in. 3. View or change extender settings as needed. Method 2: Via a Web Browser 1. Connect your computer or smartphone to the extender's network. If you are using a computer, unplug the Ethernet cable if any. 2. Launch a web browser, enter http://tplinkrepeater.net in the address bar, and log in. 3. View or change extender settings as needed. LED Explanation LED Status Indication (For Range Extender Mode) On/Off The extender is on or off. (Power) Blinking The system is starting up or firmware upgrade is in progress. (Signal) Solid blue Solid red Blinking Off The extender is connected to your router's wireless network and is in a suitable location. The extender is receiving a weak signal. Try relocating it closer to your router. WPS connection is in progress. No wireless connection is established. 2.4GHz On/Off The extender is connected or not connected to the 2.4GHz wireless network of your router. 5GHz On/Off The extender is connected or not connected to the 5GHz wireless network of your router. OneMeshTM with Seamless Roaming TP-Link OneMesh router and extenders work together to form one unified Wi-Fi network. Walk through your home and stay connected with the fastest possible speeds thanks to OneMesh's seamless coverage. INTERNET SAME Network Name & Password for seamless roaming Unified Wi-Fi Network Router and extenders share the same wireless settings, including network name, password, access control settings and more. Seamless Roaming Devices automatically switch between your router and extenders as you move through your home for the fastest possible speeds. Easy Setup and Management Set up a OneMesh network with a push of WPS buttons. Manage all network devices on the Tether app or at your router's web management page. To check full list of TP-Link OneMesh devices, scan the QR code, or visit https://www.tp-link.com/onemesh/compatibility. Q1. What should I do if the Tether app cannot find my device during setup? Try another method by following the steps below: 1. Connect your smartphone to the extender's network TP-Link_Extender. < Settings Wi-Fi Wi-Fi CHOOSE A NETWORK... TP-Link_Extender Other... 2. Launch the Tether app, and select your extender. Tip: If you have connected to the extender's Wi-Fi but still cannot find your device, try turning off your cellular data. My Devices Local Device RExxx XX-XX-XX-XX-XX-XX 3. Follow app instructions to complete the setup. If you are still having problems, contact our technical support. Q2. What should I do if the LED doesn't turn solid on after completing setup via the Tether app or web browser? You may have entered incorrect Wi-Fi password for your host router during the configuration. Check the password and try again. Make sure the extender is close to your router, preferably within 16 feet, and away from large electrical appliances. If you have enabled wireless MAC filtering, wireless access control, or access control list (ACL) on your router, disable them first, then follow any method on the front page to complete the configuration. Try setting it up via the WPS button. Reset the extender and go through the configuration again. If you are still having problems, contact our technical support. Q3. How do I reset the extender? With the extender powered on, use a pin to press the Reset button for 1 second. The extender will reboot. Reset If you need more setup help, please visit https://www.tp-link.com/support/faq/3074/, or simply scan the QR code. Safety Information • Keep the device away from water, fire, humidity or hot environments. • Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us. • Do not use the device where wireless devices are not allowed. • The socket-outlet shall be installed near the equipment and shall be easily accessible. Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk. TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011 /65/EU and (EU) 2015/863. The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca To communicate with TP-Link users or engineers, please join the TP-Link Community at https://community.tp-link.com. If you have any suggestions or needs for our product guides, you are welcome to email [email protected]. For technical support, replacement services, user manuals and other information, please visit https://www.tp-link.com/support, or simply scan the QR code. AX1500/AX1800/AX3000 Wi-Fi 6 Range Extender Model: RE500X/RE600X/RE700X