TP-Link T1500G-8T T1500G-8TUN V1 Quick Installation Guide - Page 1
TP-Link T1500G-8T Manual
View all TP-Link T1500G-8T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
7106507011 REV1.0.0 Installation Guide JetStream 8-Port Gigabit Smart Switch T1500G-8T (TL-SG2008) LED Explanation Power Power On: Power on Off: Power off 10/100/1000Mbps 1 234 5 678 On(Green): Connected to a 1000Mbps device On(Yellow): Connected to a 10/100Mbps device Flashing: Transmitting/receiving data System Flashing: System running normally On/Off: System running abnormally System Connection Ethernet Ports (1-8) 3 1 AC Power Cord 2 DC Power Adapter PSE PC Note: 1. Port 8 is a PD (Powered Device) port that supports being powered by a PSE (Power Sourcing Equipment) complying with 802.3af standard. 2. The DC power input takes precedence over the PD port. If the DC input fails, the PoE input on the PD port will supply power instead. Configuration 1. To access the GUI of the switch, open a browser and type the default management address http://192.168.0.1 in the address field of the browser, then press the Enter key. Note: To log in to the switch, the IP address of your PC should be set in the same subnet as that of the switch. The IP address is 192.168.0.x ("x" is any number from 2 to 254). Subnet Mask is 255.255.255.0. For details, please refer to Appendix B in the User Guide on the resource CD. 2. Enter admin for both the User Name and Password in the lower case letters. Then click the Login button or press the Enter key. 3. After a successful login, the main page will appear as follows, and you can click the menu on the left side to configure the corresponding functions. Note: For more details about how to configure the switch, see the User Guide on the resource CD.