TP-Link T1600G-28PS TL-SG2424P T1600G-28PSTL-SG2424P V1 CLI Reference Guide - Page 134
Syntax, Parameter, Command Mode, Example, Description
View all TP-Link T1600G-28PS TL-SG2424P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
Syntax firmware upgrade ip-address ip-addr filename name Parameter ip-addr -- IP Address of the TFTP server. Both IPv4 and IPv6 addresses are supported, for example 192.168.0.1 or fe80::1234. name -- Specify the name for the firmware file. Command Mode Privileged EXEC Mode Example Upgrade the switch's backup image file with the file firmware.bin in the TFTP server with the IP address 192.168.0.148, and reboot the switch with this firmware: T1600G-52TS# firmware upgrade ip-address 192.168.0.148 filename firmware.bin It will only upgrade the backup image. Continue? (Y/N):y Operation OK! Reboot with the backup image? (Y/N): y Upgrade the switch's backup iamge file with the file firmware.bin in the TFTP server with the IP address fe80::1234, but do not reboot the switch: T1600G-52TS# firmware upgrade ip-address fe80::1234 filename firmware.bin It will only upgrade the backup image. Continue? (Y/N):y Operation OK! Reboot with the backup image? (Y/N): n 17.19 ping Description The ping command is used to test the connectivity between the switch and one node of the network. Syntax ping [ ip | ipv6 ] { ip_addr } [ -n count ] [ -l count ] [ -i count ] 119