TP-Link T2500G-10TSTL-SG3210 T2500G-10TSUN V1 CLI Reference Guide - Page 154

Parameter num -- The maximum number of the connections to the SSH server. It ranges from 1 to 5. By default, this value is 5. Command Mode Global Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Specify the maximum number of the connections to the SSH server as 3: T2500G-10TS(config)# ip ssh max-client 3 19.6 ip ssh download Description The ip ssh download command is used to download the SSH key file from TFTP server. Syntax ip ssh download { v1 | v2 } key-file ip-address ip-addr Parameter v1 | v2 -- Select the type of SSH key to download, v1 represents SSH-1, v2 represents SSH-2. key-file -- The name of the key-file which is selected to download. The length of the name ranges from 1 to 25 characters. The key length of the downloaded file must be in the range of 512 to 3072 bits. ip-addr -- The IP address of the TFTP server. Both IPv4 and IPv6 addresses are supported, for example 192.168.0.1 or fe80::1234. Command Mode Global Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. 138