TP-Link T2600G-18TS T2600G Series Switches User Guide - Page 185

Managing MAC Address Table Security Configurations Follow these steps to configure MAC notification traps: 1) In the MAC Notification Global Config section, enable this feature, configure the relevant options, and click Apply. Global Status Table Full Notification Enable MAC notification feature globally. Enable Table Full Notification, and when address table is full, a notification will be generated and sent to the management host. Notification Interval Specify the time value of Notification Interval. Notification Interval is the interval at which the New MAC Learned notifications are continuously sent. 2) In the MAC Notification Port Config section, select one or more ports to configure the notification status. Click Apply. Learned Mode Change Enable Learned Mode Change, and when the learned mode of the specified port is changed, a notification will be generated and sent to the management host. New MAC Learned Enable New MAC Learned, and when the specified port learns a new MAC address, a notification will be generated and sent to the management host. 3) Configure SNMP and set a management host. For detailed SNMP configurations, please refer to Configuring SNMP & RMON. 3.1.2 Limiting the Number of MAC Addresses Learned in VLANs ■■ For T2600G-18TS Choose the menu L2 FEATURES > Switching > MAC Address > MAC VLAN Security to load the following page. Figure 3-2 Configuring the MAC VLAN Security Mode Follow these steps to limit the number of MAC addresses in VLANs: 1) In the MAC VLAN Security Config section, select the security mode for all VLANs. Drop Packets with new source MAC addresses in the VLAN will be dropped when the maximum number of MAC addresses is exceeded. User Guide 156