TP-Link T2700G-28TQ T2700G-28TQ V1 CLI Reference Guide Reference Guide - Page 271

T2700G-28TQ JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide encrypt-pwd -- Privacy Password, ranging from 1 to 16 characters. The question marks and spaces are not allowed. This password in the configuration file will be displayed in the symmetric encrypted form. Command Mode Global Configuration Mode Example Add Local User admin to Group group2, and configure the Security Model of the user as v3, the Security Level of the group as authPriv, the Authentication Mode of the user as MD5, the Authentication Password as 11111, the Privacy Mode as DES, and the Privacy Password as 22222: T2700G-28TQ(config)#snmp-server user admin local group2 smode v3 slev authPriv cmode MD5 cpwd 11111 emode DES epwd 22222 snmp-server community Description The snmp-server community command is used to add Community. To delete the corresponding Community, please use no snmp-server community command. SNMP v1 and SNMP v2c adopt community name authentication. The community name can limit access to the SNMP agent from SNMP network management station, functioning as a password. Syntax snmp-server community name { read-only | read-write } [ mib-view ] no snmp-server community name Parameter name -- Community Name, ranging from 1 to 16 characters. read-only | read-write -- The access rights of the community, with "read-only" and "read-write" options. mib-view -- The MIB View for the community to access. By default, it is viewDefault. Command Mode Global Configuration Mode Example Add community public, and the community has read-write management right to View viewDefault: 251