TP-Link TD-W8901N TD-W8901N V1 User Guide - Page 12
Hardware Installation, 2.1 The Front Panel - bridge mode
View all TP-Link TD-W8901N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide Chapter 2. Hardware Installation 2.1 The Front Panel Figure 2-1 The LEDs locate on the front panel. They indicate the device's working status. For details, please refer to LED Explanation. LED Explanation: Name Status Indication On (Power) Off The modem router is powered on. The modem router is off. Please ensure that the power adapter is connected correctly. On ADSL line is synchronized and ready to use. (ADSL) Flash Off The ADSL negotiation is in progress. ADSL synchronization fails. Please refer to Note 1 for troubleshooting. On The network is available with a successful Internet connection. (Internet) Flash Off There is data being transmitted or received via the Internet. There is no successful Internet connection or the modem router is operating in Bridge mode. Please refer to Note 2 for troubleshooting. On Wireless is enabled but no data is being transmitted. (WLAN) Flash The modem router is sending or receiving data over the wireless network. Off Wireless function is disabled. On There is a device connected to this LAN port. (LAN 1-4) Flash The modem router is sending or receiving data over this LAN port. Off There is no device connected to this LAN port. Note: 1. If the ADSL LED is off, please check your Internet connection first. Refer to 2.4 Connecting the Modem Router for more information about how to make Internet connection correctly. If you have already made a right connection, please contact your ISP to make sure if your Internet service is available now. 2. If the Internet LED is off, please check your ADSL LED first. If your ADSL LED is also off, please refer to Note 1. If your ADSL LED is GREEN ON, please check your Internet configuration. You may need to check this part of information with your ISP and make sure 4