TP-Link TD-W8950ND User Guide - Page 31
Authentication Method: Choose a method of authentication, AUTO, PAP, CHAP, or - default password
UPC - 845973060404
View all TP-Link TD-W8950ND manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
TD-W8950ND 150Mbps Wireless Lite N ADSL2+ Modem Router User Guide Figure 4-11 PPP Username: Enter your username for your PPPoA connection to identify and verify your account to the ISP. PPP Password: Enter your password for your PPPoA connection. Authentication Method: Choose a method of authentication, AUTO, PAP, CHAP, or MSCHAP. MTU: The default MTU value is 1480 Bytes. It is not recommended that you change the default value unless required by your ISP. The value should be between 512 and 1492. Enable Fullcone NAT: Check this box to enable the Fullcone NAT function. The default value is disabled. Dial on demand: If you check this box, the Internet connection can be terminated automatically after a specified inactivity period (Inactivity Timeout) and be re-established when you attempt to access the Internet again. The default value of Inactivity Timeout is 15. The value should be between 1 and 4320. PPP IP extension: If this box is checked, the IP address obtained by the Router will be assigned to the computer, and the NAT and Firewall will be disabled. Use Static IP Address: Check this box to use the static IP address to dial. The default value is disabled. Enable PPP Debug Mode: Check this box to enable the debug mode. The default value is disabled. Click Next button in Figure 4-11, and then you will see Figure 4-12. Check or uncheck the Enable WAN Service box according to your needs. 24