TP-Link TD-W8951ND Setup Guide - Page 3
Quick Start, Authentication Type, WPA2-PSK., Pre-Shared Key, Quick Start Complete, NEXT., Quick - cannot connect to internet
 |
View all TP-Link TD-W8951ND manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
6. On the Quick Start-Wlan , type in the SSID name (personalized wireless name), click on the drop down arrow where Authentication Type is and select WPA2-PSK. Enter the Pre-Shared Key (wireless key - mixture of both digits & letters). Click on NEXT. (Fig. 7) 7. On the Quick Start Complete!! wizard, click on NEXT. (Fig. 8) (Fig. 7) 8. Finally on the Quick Start Completed!! setup window, click on CLOSE. (Fig. 9) (Fig. 8) The router should now connect to the internet if all the above steps were followed correctly. Congratulations on setting up your Modem Router and Wifi. (Fig. 9)
-
1 -
2 -
3
 |
 |
6.
On the
Quick Start
–
Wlan
, type in the
SSID
name (personalized wireless name), click on the drop down arrow where
Authentication Type
is and select
WPA2-PSK.
Enter the
Pre-Shared Key
(wireless key
–
mixture of both digits & letters).
Click on
NEXT
.
(Fig. 7)
(Fig. 7)
7.
On the
Quick Start Complete!!
wizard, click on
NEXT.
(Fig. 8)
(Fig. 8)
8.
Finally on the
Quick Start Completed!!
setup window, click on
CLOSE.
(Fig. 9)
(Fig. 9)
The router should now connect to the internet if all the above steps were followed correctly.
Congratulations on setting up your Modem Router and Wifi.