TP-Link TD-W8970 TD-W8970 V1 User Guide - Page 32
TD-W8970, VPI 0~255, VCI 1~65535, Advance, Encapsulation Mode, ATM Qos Type, Enable IPv4, IP Address
View all TP-Link TD-W8970 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
TD-W8970 300Mbps Wireless N Gigabit ADSL2+ Modem Router User Guide Figure 4-5 ATM Configuration: ¾ VPI (0~255): Identifies the virtual path between endpoints in an ATM network. The valid range is from 0 to 255. Please input the value provided by your ISP. ¾ VCI (1~65535): Identifies the virtual channel endpoints in an ATM network. The valid range is from 1 to 65535 (1 to 31 is reserved for well-known protocols). Please input the value provided by your ISP. Click Advance, advanced selections of ATM Configuration can be shown. ¾ Encapsulation Mode: Select the encapsulation mode for the Static IP Address. Here you can leave it default. ¾ ATM Qos Type: Select ATM Qos Type provided by ISP, and the type is UBR by default. WAN Service Setup: ¾ Enable IPv4:Check the box to enable IPv4. ¾ IP Address: Enter the IP address in dotted-decimal notation provided by your ISP. ¾ Subnet Mask: Enter the subnet Mask in dotted-decimal notation provided by your ISP, usually is 255.255.255.0. ¾ Default Gateway (Optional): Enter the gateway IP address in dotted-decimal notation provided by your ISP. 23