TP-Link TD-W8970B TD-W8970 V1 User Guide - Page 14
Mbps Wireless N Gigabit ADSL2+ Modem Router User Guide, 3 Connecting, the Modem, outer, Note 1
View all TP-Link TD-W8970B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
TD-W8970 300Mbps Wireless N Gigabit ADSL2+ Modem Router User Guide On Wireless is enabled but no data is being transmitted. (WLAN) Flash Off The modem router is sending or receiving data over the wireless network. Wireless function is disabled. (WPS) On A wireless device has been successfully added to the network by WPS function. WPS handshaking is in process and will continue for about 2 Slow Flash minutes. Please press the WPS button on other wireless devices that you want to add to the network while the LED is flashing. Quick Flash A wireless device has failed to be added to the network by WPS function. Please refer to 4.7.2 WPS Settings for more information. On There is a device connected to this LAN port. (LAN1-4) Flash The modem router is sending or receiving data over this LAN port. Off There is no device connected to this LAN port. (USB on the back panel) Off No storage device or printer is plugged into the USB port. On A storage device or printer has connected to the USB port. ) Note: 1. If the ADSL LED is off, please check your Internet connection first. Refer to 2.3 Connecting the Modem Router for more information about how to make Internet connection correctly. If you have already made a right connection, please contact your ISP to make sure if your Internet service is available now. 2. If the Internet LED is off, please check your ADSL LED first. If your ADSL LED is also off, please refer to Note 1. If your ADSL LED is GREEN ON, please check your Internet configuration. You may need to check this part of information with your ISP and make sure everything have been input correctly. 5