TP-Link TL-FC311A-20 TL-FC111B-20UN V1 Installation Guide - Page 2

Scenario 2: Connect Devices without Optical Interfaces Ethernet Device without Optical Interfaces Media Converter Media Converter Gigabit Ethernet Gigabit Ethernet PWR PWR Gigabit Ethernet Gigabit Ethernet Ethernet Device without optical Interfaces Twisted-Pair Cable SC-SC Fiber Cable Twisted-Pair Cable Note: Please use one TL-FC311A-2 and one TL-FC311B-2 together to work properly. Please use one TL-FC311A-20 and one TL-FC311B-20 together to work properly. Specifications General Specifications Standards LED Connector IEEE 802.3, IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3z PWR, Link/Act 1 SC fiber optic; 1 RJ45 jack Twisted-Pair 100BASE-Tx: 2-pair UTP/STP of Cat. 5 or above (≤100 m) 1000BASE-Tx: 4-pair UTP/STP of Cat. 5e or above (≤100 m) Fiber 9/125 μm single-mode fiber Transmission Distance Wave Length TL-FC311A-2/TL-FC311B-2: ≤2 km TL-FC311A-20/TL-FC311B-20: ≤20 km TL-FC311A-2/TL-FC311A-20: 1550 nm Tx, 1310 nm Rx TL-FC311B-2/TL-FC311B-20: 1310 nm Tx 1550 nm Rx Power External Power Adapter: 5 V/0.6 A Dimensions 94.5x73x27 mm Environmental and Physical Specifications Operating Temperature Storage Temperature Operating Humidity Storage Humidity 0˚C to 50˚C (32˚F to 122˚F) -40˚C to 70˚C (-40˚F to 158˚F) 10% to 90% RH non-condensing 5% to 90% RH non-condensing To ask questions, find answers, and communicate with TP-Link users or engineers, please visit https://community.tp-link.com to join TP-Link Community. For technical support and other information, please visit https://www.tp-link.com/support, or simply scan the QR code. If you have any suggestions or needs on the product guides, welcome to email [email protected]. Safety Information Keep the device away from water, fire, humidity or hot environments. Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us. Do not use damaged charger or USB cable to charge the device. Do not use any other chargers than those recommended. Adapter shall be installed near the equipment and shall be easily accessible. Do not point or stare directly into the beam or into the optical port of the transceiver when it is operating, as this can injure your eyesight Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please don't hesitate to contact us. . Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk. EU declaration of conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce.