TP-Link TL-PA210 User Guide - Page 26
TL-PA210, Join an existing secured Powerline AV Network, Step 1, Leave
View all TP-Link TL-PA210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
TL-PA210 AV200 Mini Powerline Adapter Join an existing secured Powerline AV Network: Powerline adapter A and Powerline adapter B form a HomeplugAV Network, Powerline adapter C wants to join this network. Step 1. Press and hold the Pair button on Powerline adapter C for 3 to 8 seconds. Step 2. Press and hold the Pair button on Powerline adapter A/B for 3 to 8 seconds. (This step must be taken within 120 seconds after step 1 is finished.) Step 3. Wait for about 60 seconds while your Powerline adapters are connecting. The Power LED on Powerline adapter A/B and C will stop flashing and become solid light when the connection is made. ) Note: The sequence of Step 1 and Step 2 can be exchanged. Leave an existing secured Powerline AV Network: As the figure above shown, Powerline adapter A, B and C have formed a HomeplugAV Network. The user wants to remove one device (Powerline adapter A) from this network. Step 1. Press and hold the Pair button on Powerline adapter A for at least 10 seconds. Powerline adapter A will reset and restart. (The Power LED of Powerline adapter A will momentarily extinguish during resetting, flash during restarting then illuminate steadily.) Step 2. Wait for the reset to complete. 21