TP-Link TL-PA4010 TL-PA4010 V1.0 User Guide - Page 13

TL-PA4010

AV500 Nano Powerline Adapter

7

2.6 Hardware Connection – Internet

This section describes how to connect the Powerline Adapter into your existing ADSL broadband

connection via ADSL Ethernet port. Follow the procedures described below to connect the Powerline

Adapter to your ADSL broadband connection:

1

．

Connect one end of the provided Ethernet (RJ-45) cable to the Powerline Adapter’s Ethernet port.

2

．

Connect the other end of the Ethernet (RJ-45) cable to an available Ethernet port of your ADSL

broadband Router.

3

．

Plug the Powerline Adapter into a wall socket next to the computer.

4

．

Turn on your computer.

5

．

Check and confirm that the

Power LED,

Ethernet

LED, and

Powerline LED on the

Powerline Adapter are

ON

.

The hardware connection mechanism is shown below:

Section	Page
Package Contents	7
Chapter 1 Introduction	8
1.1 Conventions	8
1.2 System Requirement	8
1.3 Important Safety Instructions	8
Chapter 2 Connecting Mechanism	10
2.1 Introduction	10
2.2 LED Indicator	10
2.3 Physical Interface	11
2.4 Connection Instruction	12
2.5 Hardware Connection – Computer	12
2.6 Hardware Connection – Internet	13
Chapter 3 Installing Management Utility	15
Chapter 4 Using the Management Utility	19
4.1 Status	19
4.1.1 Set Local Device’s Network Name	20
4.2 Network	21
4.2.1 Rename the Remote Device/Enter Password	22
4.2.2 Add Device	22
4.3 Advanced	23
4.4 System	24
4.4.1 Upgrade Firmware	25
4.4.2 Reset Device	26
4.4.3 Set All Devices’ Network Name	26
Chapter 5 Advanced Feature: How to Use the Pair Buttons	27
5.1 Pair ( Secure with 128 bits-AES)	27
5.2 Set Up a Powerline AV Network with the Pair Button	27

TP-Link TL-PA4010 TL-PA4010 V1.0 User Guide - Page 13

Hardware Connection – Internet

Page 13 highlights