TP-Link TL-PA4010KIT TL-PA4010 V1 Quick Install Guide EU - Page 2
Set Up a Secure Powerline Network by Pairing Recommended, FAQ Frequently Asked Questions, LED
View all TP-Link TL-PA4010KIT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Set Up a Secure Powerline Network by Pairing (Recommended) You can use the Pair button on two devices at a time to create or join a secure powerline network. To create a secure powerline network: 1 Press the Pair button on one adapter. 2 Press the Pair button on another adapter. 3 Done. To join an existing secure powerline network: 1 Press the Pair button on any powerline adapter in the existing powerline network. 2 Press the Pair button on the new adapter. 3 Done. Blinking On Blinking Blinking On Blinking Existing Powerline Network LED and Button Legend LED Power Powerline Ethernet STATUS On/O Blinking On Blinking O On/O Blinking DESCRIPTION The powerline adapter is on or o . Once every second: Pairing is in process. Once every 15 seconds: Power-Saving Mode is on.* The powerline adapter is connected to a powerline network The powerline adapter is transferring data. The powerline adapter is not connected to any powerline network or is in Power-Saving Mode. The Ethernet port is connected or not connected. The Ethernet port is transferring data. * Five minutes after the connecting device is turned o , the powerline adapter will automatically switch to Power-Saving Mode. FAQ (Frequently Asked Questions) Q1. How to troubleshoot if there is no Internet connection after pairing the adapters? A1. Check if you have an Internet connection by connecting the computer directly to the modem or router. A2. Check the hardware connection between your modem and router. A3. Make sure all the Powerline LEDs are on. If they are not, reset or pair all your powerline devices again. A4. Make sure your computer's IP address is in the same segment as your router's. A5. Make sure all powerline devices are on the same electrical circuit. Q2. What can I do if a successfully-paired powerline adapter does not reconnect after it has been moved to a new location? A1. Make sure all powerline devices are on the same electrical circuit. A2. Try to pair it again with another powerline device, and make sure the Powerline LED is on before moving it to a new location. A3. Check for possible interference, such as washers, air conditioners or other household appliances that may be too close to one of the powerline devices. BUTTON Pair DESCRIPTION Press and hold for 1 second to set up or join a secure powerline network. Press and hold for 8 seconds to leave an existing powerline network. http://www.tp-link.com/en/support/faq Scan the QR code to access the Technical Support page. More advanced con gurations, such as reset, rmware upgrade and QoS con guration, can be accessed through the Powerline Utility. You can install the Powerline Utility from the resource CD (for Windows only) or download it from the TP-LINK o cial website (for Windows and Mac OS X). ©2015 TP-LINK