TP-Link TL-PS110P User Guide

TP-Link TL-PS110P Manual

Get TP-Link TL-PS110P PDF manuals and user guides
UPC - 845973031015
View all TP-Link TL-PS110P manuals
Add to My Manuals
Save this manual to your list of manuals

TP-Link TL-PS110P manual content summary:

  • TP-Link TL-PS110P | User Guide - Page 1
    ...7 CONFIGURATION SOLUTION TABLE 7 3. SOFTWARE INSTALLATION...9 INSTALLING THE PSADMIN AND PRINT SERVER'S DRIVER 9 USING PSADMIN...18 WIZARD ...19 MANUAL SETUP ...21 REFRESH...23 MULTIPLE PRINT QUEUES CONFIGURATION 24 UNINSTALLING THE PSADMIN ON WINDOWS PC 24 4. INTERNET PRINTER CONNECTION
  • TP-Link TL-PS110P | User Guide - Page 2
    PRINT SERVER FROM WINDOWS NT/2000/XP/2003 (THROUGH TCP/IP)........ 63 UPGRADING THE PRINT SERVER FROM UNIX (THROUGH TCP/IP 64 UPGRADING THE PRINT SERVER FROM BROWSER 64 9. TROUBLESHOOTING ...66 GENERAL TROUBLESHOOTING OVERVIEW 66 POWER RELATED PROBLEMS...66 PRINT PORT RELATED PROBLEMS 66 WINDOWS
  • TP-Link TL-PS110P | User Guide - Page 3
    registered trademark of Novell Inc and Windows 95/98/Me and Windows NT/2000/XP/2003/Vista are registered trademarks of and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this notice. Part No. PS110P-V1.0 3
  • TP-Link TL-PS110P | User Guide - Page 4
    Components and Features Network Print Server ․1 Parallel port ․Fast Ethernet network port: RJ-45 for 10Base-T or 100Base-TX ․1 LED to indicate Status(Yellow), 2 LED's to indicate 10M(Yellow) and 100M(Green) link lights ․One Setup CD for Windows 95/98/Me/NT/2000/XP/2003, User's Guide ․One external AC
  • TP-Link TL-PS110P | User Guide - Page 5
    items: „ One Windows-based computer with print server setup CD „ One printer with a Parallel port „ One printer cable Hardware Installation To install the print servers, you need to complete these steps: ․Confirm that your printer parallel port works well. ․Connect the print server to the network
  • TP-Link TL-PS110P | User Guide - Page 6
    To printer Reset Button Network Environment Wired Network with Print Server: Printer Print Server HUB Computer Computer Computer 6
  • TP-Link TL-PS110P | User Guide - Page 7
    Windows NT/2000/XP/2003 ․Apple EtherTalk ․UNIX /Linux system ․Internet (via Internet Printer Connection software) Configuration Solution Table Setup Operating System Function Remarks PSAdmin utility / Setup Wizard Windows Install a single Easy printer installation runs from print server
  • TP-Link TL-PS110P | User Guide - Page 8
    document over Internet, replacing fax, mail Internet Printing Protocol- enabled print server Comment Configuration solution Table has many installations way to setup Windows 95/98/Me, Windows NT/2000/XP/2003, NetWare, UNIX / Linux system and Mac computer. Firstly, we introduce PSAdmin utility
  • TP-Link TL-PS110P | User Guide - Page 9
    3. Software Installation The PSAdmin is a proprietary Windows-based management program that can assist you in configuring and managing your print server in NetWare environments. The program can be installed from the setup CD of print server. Installing the PSAdmin and Print Server's Driver 1. To
  • TP-Link TL-PS110P | User Guide - Page 10
    to install the print server and configure the connected printer. Note: The setup CD will install the print server's driver, PSAdmin and Setup Wizard into your computer. The default installation directory will be C:\Program files\Network Print Monitor. 4. Click Next, the wizard will automatically
  • TP-Link TL-PS110P | User Guide - Page 11
    11
  • TP-Link TL-PS110P | User Guide - Page 12
    : 192.168.0.10 z Subnet Mask: 255.255.255.0 Click Yes if you want change IP address to the print server, and then click Next. Note: The IP address of print server must be within the same subnet as your network adapter. 7. In the setup wizard, select an already configured printer from the list, click
  • TP-Link TL-PS110P | User Guide - Page 13
    Select Add New Printer if the print server is connected to a printer that hasn't been installed before and does not appear in the list. 13
  • TP-Link TL-PS110P | User Guide - Page 14
    8. Click Add New Printer to launch Windows Add Printer Wizard. 9. Click Next and select Local Printer, make sure the Automatically detect and install my Plug and Play printer check box is NOT checked. Then click Next. 14
  • TP-Link TL-PS110P | User Guide - Page 15
    10. Make sure the Use the following port radio-button is clicked and select LPT1: (recommended Printer Port) from the pull-down list. Then click Next. 11. Select Manufacturer and Printer from the lists of printer's driver. Then click Next. 15
  • TP-Link TL-PS110P | User Guide - Page 16
    network user, print a test page (please select No.), etc. Select the appropriate radio-button and click Next and Finish. 14. In the setup wizard, finish the installation by highlighting the installed printer in the Select a Printer list and click Next, NEXT -> Finish. 15. From Windows system, go
  • TP-Link TL-PS110P | User Guide - Page 17
    16. Right-click, select Properties -> Ports and verify that the print server's port appears. 17
  • TP-Link TL-PS110P | User Guide - Page 18
    : The name of the print server hardware used for identification purposes. MAC Address: The Ethernet address of the print server. Print server Name: The print server to which the device is attached. Version: The firmware version of the print server. Status: To come up a Printer's status presently. 18
  • TP-Link TL-PS110P | User Guide - Page 19
    Wizard is a configuration program that can assist you in setting up the necessary parameters for your print server device to function. Setup a print server by using Wizard. TCP/IP Wizard 1. Click Wizard button just like a picture ＜ ＞.and select TCP/IP Wizard. 2 Select "Obtain an IP address from
  • TP-Link TL-PS110P | User Guide - Page 20
    in a Print Queue Names. Note: Each print queue corresponds to each print port of the print server. 6. Click OK. 7. Done. 8. From your NetWare client computer, such as Windows 95/98/Me, create a printer that is connected (redirected) to one of the NetWare print queues serviced by the print server. 20
  • TP-Link TL-PS110P | User Guide - Page 21
    parameters (Refer to your Novell NetWare print server/Services manual for details). 2. Log into your NetWare file server as a Supervisor (Admin.) or equivalent. From your Windows 95/98/Me, run PSAdmin. 3. Select the print server that you wish to configure. 4. Click Properties in the tool bar
  • TP-Link TL-PS110P | User Guide - Page 22
    The default value is "Disable". Note: 1.Once this option is enabled, the following IP address, Subnet Mask, Gateway will be grayed out and are not available for editing. 2.While the print server supports DHCP, we strongly recommend you manually specify a fixed IP address to the print server. Specify
  • TP-Link TL-PS110P | User Guide - Page 23
    picture ＜ ＞, as shown as follow picture 2. Select General Upgrade. Make sure that the upgrade file is located in the same directory as PSAdmin. Reset 1. Click Reset button just like a picture ＜ ＞. 2. Reset allows the user to reset the print server device in order to establish a new connection or for
  • TP-Link TL-PS110P | User Guide - Page 24
    will cause printer to abnormal printing. Multiple Print Queues Configuration To configure the print server to service multiple print queues, please follow the instructions listed below: 1. Log into your NetWare file server as a Supervisor (Admin.) or equivalent. 2. Run the PSAdmin from your Windows
  • TP-Link TL-PS110P | User Guide - Page 25
    3. Click Change or Remove Programs tab. 4. Select Network Print Monitor for Windows 95/98/NT/2000/XP/2003 and click Change/Remove button. 5. The un-installation wizard program will be launched. 6. Follow the directions on the screen to complete the un-installation procedure. 25
  • TP-Link TL-PS110P | User Guide - Page 26
    to configure the firewall to accept incoming IPP requests. Windows NT/2000/XP/2003 For Windows NT/2000/XP/2003, you can use a supported Web Browser, for example, Netscape or IE to view the embedded web server on the print server. Contact your administrator to get the IP address or URL of the printer
  • TP-Link TL-PS110P | User Guide - Page 27
    print server's IP address, for example, http://192.168.10.182/lp1. Then Click Next. ** One port should be the port name as lp1. 7.It will check print server to connect to HP printer, if not, it will appear as follow picture. Then Click OK. 8. Select the appropriate printer manufacturer and printer
  • TP-Link TL-PS110P | User Guide - Page 28
    to the print server or any standard printer MIB devices. For more information about a procedure or Windows in the HP Web JetAdmin software, see about HP's relation document. System Requirements HP Web JetAdmin software runs on Microsoft Windows NT, HP-UX, Solaris, Red Hat Linux and SuSE Linux system
  • TP-Link TL-PS110P | User Guide - Page 29
    . For example: http://server.domain:port/ Follow the instructions on the appropriate home page to configure or modify your printer. Note: You can also substitute the server domain with TCP/IP address. Removing HP Web JetAdmin Utility To remove HP Web JetAdmin software from your web server, use the
  • TP-Link TL-PS110P | User Guide - Page 30
    Menu Once you have finished the IP address configuration with print server. You should be use web browser to view and management the print server. The status menu of the print server helps administrator control the print server's System, Printer, NetWare, TCP/IP, SNMP and AppleTalk of status for
  • TP-Link TL-PS110P | User Guide - Page 31
    of the print server. When you start the print server, it will compute the print server from start time to power off time. Firmware Version: This option allows you to view firmware version of the print server. To verify the print server's firmware version is newer in this time. MAC Address: This
  • TP-Link TL-PS110P | User Guide - Page 32
    option allows you to view model of the printer. When the printer connected with the print server, it will be show in the model box. Printing Language Supported: This option allows you to view command to set the printer. When the printer connected with the print server, it will be show in the command
  • TP-Link TL-PS110P | User Guide - Page 33
    option allows the print server to obtain IP-related settings automatically from your DHCP server. IP Address: This option allows you to view IP address from the print server. The IP address must meet the IP addressing requirements of the network segment. (default: 192.168.0.10) Subnet Mask: This
  • TP-Link TL-PS110P | User Guide - Page 34
    Name: This option allows you to view print server's name would be configured by PSAdmin utility. Polling Time: This option allows you to view polling time from the print server. This function is search for NetWare Server by per time. NetWare NDS Setting: Use NDS Mode: Enable or Disable. Name of
  • TP-Link TL-PS110P | User Guide - Page 35
    web browser. Port Name: -xxxxxx-1, where xxxxxx represents the last six digits of the print server's Node ID. Printer Type: This option allows you to view printer type from the print server. If you are using a PostScript printer you can select the LaserWriter 8 icon from your Mac computer
  • TP-Link TL-PS110P | User Guide - Page 36
    from the print server. SMB Status 3.Click Status, it then appears the sub-menu. 4.Click SMB, it then as shown in the following picture. Workgroup Name: This option allows you to view the SMB Workgroup Name from the print server. It must match the SMB workgroup name of your Windows-based computer
  • TP-Link TL-PS110P | User Guide - Page 37
    browser to configure the print server. The setup menu of the print server helps administrator to setup the print server's System, Printer, NetWare, TCP/IP, SNMP and AppleTalk. Preparation Enter the IP address of the print server as the URL, default: 192.168.0.10. Then the print server's home page
  • TP-Link TL-PS110P | User Guide - Page 38
    : This option allows you to input setup password of the print server. When you select setup menu of web configuration from the print server, it then as shown in the following picture. Re-type Password. ․User Name: You must be input the default administration user name, admin as login user name
  • TP-Link TL-PS110P | User Guide - Page 39
    Bi-directional Settings: This option allows you to select the bi-directional of the print server. There are two ways to select this option, includes Disable or Auto Detect. TCP/IP Setup: 3. Click Setup, it then appears the sub-menu. 4. Click TCP/IP, it then as shown in the following picture. 39
  • TP-Link TL-PS110P | User Guide - Page 40
    to input gateway from the print server. This IP address of gateway must meet the router or gateway to go across of the network segment. Rendezvous Settings: Enable/Disable the Rendezvous support for Mac OS 10. NetWare Setup 1.Log into your NetWare file server as a Supervisor (Admin.) or equivalent
  • TP-Link TL-PS110P | User Guide - Page 41
    print server name which configured by PSAdmin utility or PCOMSOLE program. Polling Time: The time interval in which the print server unit polls the file server for servicing of print queues. Logon Password: This option allows you to input encrypted password from the print server. The print server
  • TP-Link TL-PS110P | User Guide - Page 42
    Supervisor (Admin.) or equivalent via a Bindery connection. 8. Run NetWare's PCONSOLE and add users to the "Queue Users" list. 9. From your NetWare client computer, such as Windows 95/98/Me, create a printer that is connected (redirected) to the NetWare print queue serviced by the print server. 42
  • TP-Link TL-PS110P | User Guide - Page 43
    Macintosh workstations connected to an Ethernet using AppleTalk protocol. The basic configuration is for the print server in an AppleTalk environment is performed simply by opening the Chooser window and selecting a printer that is connected to the print server. 1.Click Setup, it appears the sub
  • TP-Link TL-PS110P | User Guide - Page 44
    change the default Chooser name and Zone name of a PRINT SERVER by using your web browser before proceeding with this installation. Please see the previous section in this chapter for details. 2. If you use Mac OS 8.x or 9.x, please make sure your printer support PostScript. 5. Click Setup... button
  • TP-Link TL-PS110P | User Guide - Page 45
    When accessing (traversing) MIB objects in the print server using NMS software called SNMP manager, you need to provide a community name in each SNMP request for authentication purpose. The print server supports up to two community names. The default community name is public (case-sensitive), with
  • TP-Link TL-PS110P | User Guide - Page 46
    not correct. Users can set up print server's SNMP functions by using their browsers. 1.Click Setup, it then appears the sub-menu. 2.Click SNMP, it then as shown in the following picture. SNMP Community: The print server supports up to two community names. The default community name is public (case
  • TP-Link TL-PS110P | User Guide - Page 47
    on the Network. 4. Shared Name: This option allows you to assign a name to print server's port. 6. Network Print Monitor Preparation The print server supports TCP/IP, IPX/SPX and NetBEUI protocols under Windows 95/98/Me. Please make sure that the following steps have been completed before proceeding
  • TP-Link TL-PS110P | User Guide - Page 48
    . For further information, please read "TCP/IP Protocol Installation" section in this chapter. Note: If TCP/IP protocol is chosen, please refer to "Assigning an IP Address to the print server" section later in this chapter. IPX/SPX The IPX/SPX-compatible Protocol must be installed. For further
  • TP-Link TL-PS110P | User Guide - Page 49
    computer. 9. Done. Note: Using TCP/IP protocol to access the print server requires well-configured TCP/IP settings. If you are not familiar with these settings, please consult your network administrator for details or ask for help. IPX/SPX-compatible Protocol Installation 1. Click Start, point to
  • TP-Link TL-PS110P | User Guide - Page 50
    a smooth installation: 1. Run Setup from the print server's NetWare, Win 95/98/Me/NT/2000/XP/2003 Setup diskette 2. The Network Print Monitor for Windows 95/98/Me Setup will then appear. Click Next. 3. A message reading, "Setup is complete. You may add the Network Print Port by using the PSAdmin
  • TP-Link TL-PS110P | User Guide - Page 51
    of the Node ID, located on the back of the print server unit). Select one printer server port from the list, which is now connected to (one of) your printer(s), as shown in the following picture. „ By default, the computer will first search for the print server(s) on the network by using the IPX/SPX
  • TP-Link TL-PS110P | User Guide - Page 52
    of the print server unit). Select one of the print server's ports from the list. Uninstalling Network Print Port on Windows 95/98/Me/NT/2000/XP/2003 To provide users an easiest way to remove all of the Network Print Port components from Windows 95/98/Me, the Network Print Port software comes with
  • TP-Link TL-PS110P | User Guide - Page 53
    a DHCP server. While the print server supports DHCP, we strongly recommend you manually specify a fixed IP address to the print server. By default, the print server's DHCP function is disabled. Windows NT LPR Port Printing Installation 1. Click Start, point to Settings, and select Printer. 2. Run
  • TP-Link TL-PS110P | User Guide - Page 54
    leave it in default and click Next. 12. A message reading, "After your printer is installed, Windows can print a test page so you can confirm that the printer is set up properly.", Select Yes (Recommended) and click Finish. 13. Done. Windows 2000/XP/2003 Standard TCP/IP Port Printing Installation 54
  • TP-Link TL-PS110P | User Guide - Page 55
    Wizard box will then appear as shown the picture as below, and type in the IP address assigned to the print server in the Printer Name or IP Address box, Click Next. 6. In the Add Standard TCP/IP Printer Port Wizard box as shown in the following picture, Select Custom, Click Settings button, and
  • TP-Link TL-PS110P | User Guide - Page 56
    the Configure Standard TCP/IP Port Monitor box as shown in the following picture, select LPR form Protocol, type in a queue name, for example, lp1. 8. Click OK, and Next. Note: Please DO NOT type any other name than lp1 in this step. 9. Click Finish. 10. Select the appropriate printer manufacturer
  • TP-Link TL-PS110P | User Guide - Page 57
    11. Type in a new Printer name or leave it in default, and click Next button. 12. A message reading, "To confirm that the printer is installed properly, you can print a test page". Select Yes (Recommended) and click Finish. 13. Done. 57
  • TP-Link TL-PS110P | User Guide - Page 58
    lp1. If the printer connected to the second print server port, please choose lp2. If the printer connected to the third print server port, please choose lp3. 5. Click "OK". 6. Enter /Printer / Make Default. System V Release 4 Unix 1. For example: the print server has a static IP address: 192.168
  • TP-Link TL-PS110P | User Guide - Page 59
    Red Hat Linux 7.2/7.3 or later with X-Window system installed. 1. Make sure that the TCP/IP is well configured on your RedHat system, including network interface card's driver and IP-related settings say, IP address, subnet mask, and gateway IP). 2. Log in root. 3. Assign Print Server an IP address
  • TP-Link TL-PS110P | User Guide - Page 60
    7. Click Forward button. 8. In the Name field, type a user-defined name, click Forward. 60
  • TP-Link TL-PS110P | User Guide - Page 61
    Type field, choose Networked UNIX. 10. In the Server field, type the IP address of print server 11. In the Queue field, type a print server's port name, which connect to the printer. For example: lp1. 12. Click Forward button. 13. In the Printer field, choose Postscript Printer. 14. Choose the model
  • TP-Link TL-PS110P | User Guide - Page 62
    15. Done. 62
  • TP-Link TL-PS110P | User Guide - Page 63
    into several Sections; please refer to the following lists for your systems. 1. Upgrading the print server from PSAdmin 2. Upgrading the print server from Windows NT/2000/XP/2003 3. Upgrading the print server from UNIX system 4. Upgrading the print server from WEB browser Note: 1.Before you proceed
  • TP-Link TL-PS110P | User Guide - Page 64
    transfer to complete. 8. Quit from tftp. 9. Done. Upgrading the print server from Browser 1. Ensure binary file is located in your current working directory. 2. Enter the IP address of the print server as the URL. 3. Click Misc, and then choose Firmware Upgrade, it then as shown in the following
  • TP-Link TL-PS110P | User Guide - Page 65
    5. Click Upgrade. 6. Done. 65
  • TP-Link TL-PS110P | User Guide - Page 66
    an incorrect AC adapter will damage your print server. Print Port Related Problems Printing data failure may be caused by a loose connection of the print server to the parallel port of the printer. Check to see if any of the pins on the parallel port connector are damaged. In addition, check the
  • TP-Link TL-PS110P | User Guide - Page 67
    95/98/Me/NT/2000/XP/2003 Troubleshooting Multi-Segment LAN Environment Installation (through the Network Print Port) If your print server and Windows 95/98/Me/NT/2000/XP/2003 are located on two different segments, and your Windows NT server is used as the router/gateway you will need to implement
  • TP-Link TL-PS110P | User Guide - Page 68
    on the next print server's configuration screen. Find your original print server according to its Port Name or other distinguished name and click this print server. 6. Click OK and it returns to the printer's Properties page. 7. Click OK. 8. Done. Print server Reconfiguration Procedure on Windows NT
  • TP-Link TL-PS110P | User Guide - Page 69
    a new segment" section for more detailed reconfiguration instructions. Novell NetWare Troubleshooting Many printing problems can be traced back to incorrect or incomplete print server installations. It is always wise to check the installation configurations first. In some cases, if necessary, delete
  • TP-Link TL-PS110P | User Guide - Page 70
    this is the case, please consult your network administrator to obtain an unused IP address for your print server. C. The print server is on one segment and your Windows NT server is on the other segment. (This troubleshooting guide will also apply to a multiple-segmented network while installing the
  • TP-Link TL-PS110P | User Guide - Page 71
    step you must specify an IP address which is valid on Segment B, such as 192.72.214.100 in this example, rather than 192.72.214.68. 7. Type, for example, "tftp 192.72.214.68 put config.txt" to save this new configuration back to print server. 8. Move the print server back to the Segment B. 9. Done
  • TP-Link TL-PS110P | User Guide - Page 72
    Appendix: Rendezvous with Mac OS X 10.3.7 1. Enable the Rendezvous settings from the print server's WEB configuration. 2. Click "Printer Setup Utility" from the bottom toolbox of Mac. 72
  • TP-Link TL-PS110P | User Guide - Page 73
    3. Click "Add". 73
  • TP-Link TL-PS110P | User Guide - Page 74
    4. Choose "Rendezvous", and then Mac OS will automatically search the print server on the network. 5. Choose the proper printer model that connected to print server, and then click "Add". 74
  • TP-Link TL-PS110P | User Guide - Page 75
    printer with Rendezvous has been successfully installed. SMB Printing with Windows XP 1. Enable the SMB settings from the print server's WEB configuration. Assume your computers use the "WORKGROUP" as the SMB workgroup name in Windows. Please assign the same SMB name to your print server. If print
  • TP-Link TL-PS110P | User Guide - Page 76
    2. Now you can find the print server from the SMB workgroup of Windows. Then, double click it. 3. Double click it again. 76
  • TP-Link TL-PS110P | User Guide - Page 77
    4. Now you have to install the printer's driver. 5. Choose it from the "Add Printer Wizard". 77
  • TP-Link TL-PS110P | User Guide - Page 78
    6. Install printer successfully. 7. Now, you can find your printer's icon and you can use the SMB printing mode. 78
  • TP-Link TL-PS110P | User Guide - Page 79
    . 4. Release the reset button. 5. The print server will restart. WARNING: This will erase all settings of print server to default and should be performed with caution! After performing a factory default, the default settings will be: z DHCP client: off z IP address: 192.168.0.10 Subnet Mask: 255
  • TP-Link TL-PS110P | User Guide - Page 80
    To printer Reset Button 80
  • TP-Link TL-PS110P | User Guide - Page 81
    proper printer driver. If these printer drivers are not available to you, please contact your printer manufacturer. Question C The upgrading process indication bar stops and does not seem to proceed again while upgrading the print server. Possible Explanation There might be a network problem. This
  • TP-Link TL-PS110P | User Guide - Page 82
    . The print server must be upgraded again by using the PSAdmin. Please see Chapter 3 for details. Question E The PSAdmin reports "Create Print server Error", "Create Printer Error", or "Create Print Queue Error" while using Auto Setup. Possible Explanation The print server name, the printer name
  • TP-Link TL-PS110P | User Guide - Page 83
    Additional Installation Instructions Panasonic KX-P6100/6300/6500 If you are using a Panasonic KX-P6100/6300/6500 laser printer with the print server through the Network Print Port under Windows 95/98, please redirect the printer named "Panasonic KX-P6100 PCL" or "Panasonic KX-P6300 PCL", or "
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
T
ABLE OF
C
ONTENTS
C
OPYRIGHT
........................................................................................................................................
3
1.
INTRODUCTION
............................................................................................................................
4
P
RODUCT
O
VERVIEW
........................................................................................................................
4
C
OMPONENTS AND
F
EATURES
..........................................................................................................
4
H
ARDWARE
I
NSTALLATION
.................................................................................................................
5
N
ETWORK
E
NVIRONMENT
..................................................................................................................
6
W
IRED
N
ETWORK WITH
P
RINT
S
ERVER
............................................................................................
6
2. PRINT SERVER INSTALLATION
..............................................................................................
7
P
REPARATION
....................................................................................................................................
7
C
ONFIGURATION
S
OLUTION
T
ABLE
...................................................................................................
7
3. SOFTWARE INSTALLATION
.....................................................................................................
9
I
NSTALLING THE
PSA
DMIN AND
P
RINT
S
ERVER
’
S
D
RIVER
...............................................................
9
U
SING
PSA
DMIN
..............................................................................................................................
18
W
IZARD
............................................................................................................................................
19
M
ANUAL
S
ETUP
...............................................................................................................................
21
R
EFRESH
..........................................................................................................................................
23
M
ULTIPLE
P
RINT
Q
UEUES
C
ONFIGURATION
...................................................................................
24
U
NINSTALLING THE
PSA
DMIN ON
W
INDOWS
PC
............................................................................
24
4. INTERNET PRINTER CONNECTION AND HP WEB JETADMIN
.....................................
26
IPP
O
VERVIEW
................................................................................................................................
26
HP
W
EB
J
ET
A
DMIN
O
VERVIEW
.......................................................................................................
28
I
NSTALLING
HP
W
EB
J
ET
A
DMIN
......................................................................................................
29
R
EMOVING
HP
W
EB
J
ET
A
DMIN
U
TILITY
.........................................................................................
29
5. CONFIGURATION FROM EMBEDDED WEB SERVER
......................................................
30
O
VERVIEW
........................................................................................................................................
30
U
SING
E
MBEDDED
W
EB
S
ERVER
....................................................................................................
30
S
ETUP
M
ENU
...................................................................................................................................
37
I
NSTALLING
P
RINT
S
ERVER ON
N
ET
W
ARE
4.
X
/5.
X
.........................................................................
42
S
ETTING
U
P A
M
ACINTOSH
C
OMPUTER
..........................................................................................
44
6. NETWORK PRINT MONITOR
..................................................................................................
47
P
REPARATION
..................................................................................................................................
47
TCP/IP
P
ROTOCOL
I
NSTALLATION
..................................................................................................
48
IPX/SPX-
COMPATIBLE
P
ROTOCOL
I
NSTALLATION
.........................................................................
49
N
ET
BEUI
P
ROTOCOL
I
NSTALLATION
..............................................................................................
49
W
INDOWS
95/98/M
E
/NT/2000/XP/2003
MANUAL
I
NSTALLATION
P
ROCEDURE
...........................
50
U
NINSTALLING
N
ETWORK
P
RINT
P
ORT ON
W
INDOWS
95/98/M
E
/NT/2000/XP/2003
.................
52
7. TCP/IP LPR PORT PRINTING INSTALLATION
...................................................................
52
B
ASIC
TCP/IP
I
NSTALLATION
O
VERVIEW
.......................................................................................
52
A
SSIGNING AN
IP
A
DDRESS
.............................................................................................................
53
W
INDOWS
NT
LPR
P
ORT
P
RINTING
I
NSTALLATION
.......................................................................
53
W
INDOWS
2000/XP/2003
S
TANDARD
TCP/IP
P
ORT
P
RINTING
I
NSTALLATION
...........................
54
UNIX
I
NSTALLATION
........................................................................................................................
58
1