TP-Link TL-SG1016 User Guide - Page 9

TL-SG1008/TL-SG1016/TL-SG1024/TL-SG1048 Gigabit Ethernet Switch User Guide Chapter 2 Installation 2.1 Mounting the Switch on a Desk Before placing the Switch on a desk, attach four rubber footpads to the flutes on the Switch bottom, then lay the Switch on the desktop, where can be able to withstand 5kg of weight. TL-SG1008, TL-SG1016, TL-SG1024 and TL-SG1048 are different in the number of LED indicators and RJ45 ports. All figures are of TL-SG1008 in this user's guide. Note ¾ Make sure there is a grounded AC outlet within 1.5 meters, and working well. ¾ Make sure there is free space for radiating heat and air. ¾ Make sure not too place anything to heavy on top of the switch. 2.2 Mounting the Switch in a Rack The dimension of the Gigabit Ethernet Switch is designed according to the standard 19" rack-mountable steel case of Electronic Industries Association. Turn off all the equipment connected to the Switch before mounting it in the rack, then rivet the two "L" brackets onto each side of the Switch, fasten it with screws in the rack. 4