TP-Link TL-SG1016PE TL-SG1016PEUN V1 Installation Guide - Page 7
Reset, 100/1000Mbps RJ45 Port - 16 port
View all TP-Link TL-SG1016PE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
16/24-Port Gigabit Easy Smart Switch The front panel of TL-SG1024DE is shown as the following figure. Figure 1-2 Front Panel of TL-SG1024DE LEDs Reset 10/100/1000Mbps RJ45 Port LEDs LED Power Link/Act 1000Mbps Status On Off On Flashing Off On Off Indication The switch is powered on. The switch is powered off or power supply is abnormal. There is a device linked to the corresponding port but no activity. The corresponding port is transmitting or receiving data. There is no device linked to the corresponding port. A 1000Mbps device is connected to the corresponding port. A 10/100Mbps device or no device is connected to the corresponding port. Reset Press this button for five seconds or above to reset the software setting back to factory default settings. 10/100/1000Mbps RJ45 Port Designed to connect to the device with a bandwidth of 10Mbps, 100Mbps or 1000Mbps. Each has a corresponding Link/Act LED and a 1000Mbps LED. The front panel of TL-SG1016PE is shown as the following figure. Figure 1-3 Front Panel of TL-SG1016PE LEDs Reset 10/100/1000Mbps RJ45 Port Introduction 02