TP-Link TL-SG105S Switch Regulatory ComplianceUN - Page 12

For Class B switch with power adapter: FCC Compliance Information Statement Product Name: Switch Model Number: TL‑SF1005D / TL-SF1006P /TL‑SF1008D / TL‑SF1016D / TL‑SG1005D / TL‑SG105 / TL‑SG105E / TL‑SG105S / TL‑SF1024M / TL‑SG1008D / TL‑SG108 / TL‑SG108E / TL‑SG108S / TL‑SG105PE Component Name Model T050060‑2B1 (For TL‑SF1005D / TL‑SF1008D / TL‑SF1016D / TL‑SG1005D / TL‑SG105 / TL‑SG105E / TL‑SG105S) Power Adapter T090060‑2B1 (For TL‑SF1024M / TL‑SG1008D / TL‑SG108 / TL‑SG108E / TL‑SG108S) T535131‑2‑DT (For TL-SF1006P / TL‑SG105PE) Responsible party: TP‑Link USA Corporation, d/b/a TP‑Link North America, Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: https://www.tp‑link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6803 E‑mail: sales.usa@tp‑link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ■■ Reorient or relocate the receiving antenna. ■■ Increase the separation between the equipment and receiver. ■■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.