TP-Link TL-SG2216 TL-SG2424 V1 CLI Reference Guide - Page 11
Using the CLI, 1.1 Accessing the CLI
View all TP-Link TL-SG2216 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Chapter 1 Using the CLI 1.1 Accessing the CLI You can log on to the switch and access the CLI by logging on to the switch remotely by a Telnet through an Ethernet port. To log on to the switch by a Telnet connection, please take the following steps: 1. Make sure the switch and the PC are in the same LAN. 2. Click Start → Run to open the Run window. Figure 1-1 Open the Run window 3. Type cmd in the prompt Run window as Figure 1-2 and click OK. Figure 1-2 Run Window 3
3
Chapter 1
Using the CLI
1.1 Accessing the CLI
You can log on to the switch and access the CLI by logging on to the switch remotely by a Telnet
through an Ethernet port. To log on to the switch by a Telnet connection, please take the following
steps:
1.
Make sure the switch and the PC are in the same LAN.
2.
Click
Start
→
Run
to open the
Run
window.
Figure 1-1 Open the Run window
3.
Type cmd in the prompt Run window as Figure 1-2 and click
OK
.
Figure 1-2 Run Window