TP-Link TL-SL2210 TL-SL2210 V1 User Guide 1910010924 - Page 13
Reset, 100Mbps Ports, SFP Ports, 100Mbps or 1000Mbps. Each has a corresponding 1000M 1000Mbps LED.
View all TP-Link TL-SL2210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
The front panel of TL-SL2218 is shown as Figure 2-2. Figure 2-2 Front Panel of TL-SL2218 The front panel of TL-SL2428 is shown as Figure 2-3. Figure 2-3 Front Panel of TL-SL2428 The front panel of TL-SL2452 is show as Figure 2-4. Figure 2-4 Front Panel of TL-SL2452 The following parts are located on the front panel of the switch: Reset: Press this button for five seconds or above to reset the software setting back to factory default setting. 10/100Mbps Ports: Designed to connect to the device with a bandwidth of 10Mbps or 100Mbps. Each has a corresponding 10/100M (10/100Mbps) LED. 10/100/1000Mbps Ports: Designed to connect to the device with a bandwidth of 10Mbps, 100Mbps or 1000Mbps. Each has a corresponding 1000M (1000Mbps) LED. SFP Ports: Designed to install the SFP module. TL-SL2218/TL-SL2428 features some SFP transceiver slots that are shared with the associated RJ45 ports. The associated two ports are referred as a "Combo" port, which means they cannot be used simultaneously, otherwise only SFP port works. Meanwhile, the associated two ports share the same LED. For TL-SL2218, Port 17 shares the same LED with Port 17F and Port 18 shares the same LED with Port 18F; for TL-SL2428, Port 27 shares the same LED with Port 27F and Port 28 shares the same LED with Port 28F. 6