TP-Link TL-WPA4220T KIT TL-WPA4220 V1 User Guide - Page 20
TL-WPA4220/TL-WPA2220, 1.2 For Wireless Connection, admin, Status, Network, Wireless, Powerline,
View all TP-Link TL-WPA4220T KIT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
TL-WPA4220/TL-WPA2220 300Mbps AV500/AV200 WiFi Powerline Extender Note: If the above screen does not prompt, it means that your web-browser has been set to a proxy. Go to Tools >Internet Options>Connections>LAN Settings, in the screen that appears, cancel the Using Proxy checkbox, and click OK to finish it. 3.1.2 For Wireless Connection If your device is connected to the extender via wireless, you can log in to the extender by following the steps below: 1. Launch a web-browser and type in the default domain name http://tplinkplclogin.net in the address field. Figure 3-4 Log in to the Router 2. Enter admin for the User name and Password (both in lower case letters) in the screen below. Then click OK or press Enter. Figure 3-5 Login Windows Note: If the above screen does not prompt, it means that your web-browser has been set to a proxy. Go to Tools>Internet Options>Connections>LAN Settings, in the screen that appears, cancel the Using Proxy checkbox, and click OK to finish it. After a successful login, you can configure and manage the device. There are six main menus on the leftmost column of the Web-based management page: Status, Network, Wireless, Powerline and System Tools. Submenus will be available after clicking one of the main menus. On the right of the Web-based management page lays the detailed explanations and instructions for the corresponding page. 12