TP-Link TL-WPA4230P TL-WPA4230P KIT V1 Quick Install Guide EU

Quick Installation Guide

More:

To add additional powerline

adapters and powerline Wi-Fi extenders

with the default settings, simply plug them

into the wall sockets on the same electrical

circuit.

Extender

(TL-WPA4230P)

Adapter

(TL-PA4020P)

Applicable to TL-WPA4230P and its multiple-pack kits

AV500 Passthrough Powerline Wi-Fi Extender

7106505539

REV2.0.1

Plug and Play

Set Up a New Wireless Network

Use the default wireless network name

(SSID) and password on the provided Wi-Fi

Info Card to access the Internet.

Router

1

2

3

4

Enjoy!

* TL-WPA4230P KIT (European version) is used for demonstration in this QIG.

Image may differ from actual product.

Clone Your Router’s Wi-Fi Settings to the Extender (Recommended)

Note:

If the Wi-Fi LED still blinks slowly for longer than 30 seconds, unplug the extender and plug

it back in, then try again. Or use “Customize the Extender’s Wi-Fi Settings” on the back instead.

If your router supports WPS, you can continue with the steps below to clone

its current Wi-Fi settings to the extender.

Tips:

We recommend that you plug in the extender near your router for Wi-Fi cloning.

Press the WPS button

for 2 seconds.

1

Within 2 minutes, press

the Wi-Fi Clone button for

1 second.

2

Done.

3

Wait until the Powerline

LED turns on.

Solid on for 5 seconds

and then blinks rapidly

WPS

WAN

LAN

Wireless Router

Blinks slowly for

about 10 seconds