TP-Link TL-WPA4230P TL-WPA4230P KIT V1 Quick Install Guide EU - Page 1

Quick Installation Guide AV500 Passthrough Powerline Wi-Fi Extender Applicable to TL-WPA4230P and its multiple-pack kits * TL-WPA4230P KIT (European version) is used for demonstration in this QIG. Image may di er from actual product. 7106505539 REV2.0.1 Plug and Play Set Up a New Wireless Network Powerline Adapter (TL-PA4020P) 2 Router LAN WAN 1 Extender (TL-WPA4230P) Wait until the Powerline LED turns on. 3 More: To add additional powerline adapters and powerline Wi-Fi extenders with the default settings, simply plug them into the wall sockets on the same electrical circuit. 4 Enjoy! Use the default wireless network name (SSID) and password on the provided Wi-Fi Info Card to access the Internet. Clone Your Router's Wi-Fi Settings to the Extender (Recommended) If your router supports WPS, you can continue with the steps below to clone its current Wi-Fi settings to the extender. Tips: We recommend that you plug in the extender near your router for Wi-Fi cloning. 1 Press the WPS button for 2 seconds. 2 Within 2 minutes, press the Wi-Fi Clone button for 1 second. 3 Done. Wireless Router WAN WPS LAN 15 250 Solid on for 5 seconds 500Mbps and then blinks rapidly Blinks slowly for about 10 seconds Note: If the Wi-Fi LED still blinks slowly for longer than 30 seconds, unplug the extender and plug it back in, then try again. Or use "Customize the Extender's Wi-Fi Settings" on the back instead.