TP-Link TL-WPA7510 KIT TL-WPA7510 KITEU V1 Quick Installation Guide

TP-Link TL-WPA7510 KIT Manual

TP-Link TL-WPA7510 KIT manual content summary:

  • 1
  • 2

Ethernet Cable
Hello, I’m here.
Follow me to extend your Wi-Fi network.
Extender
TL-WPA7510
Adapter TL-PA7010
(For demonstration only)
2
Pair the powerline devices.
4
3
Note: If the Power LED does not
blink, press the Pair button again.
Press the Pair button on the
adapter for 1 second. The Power
LED
starts blinking.
A
Within 2 minutes, press the
Pair button on the extender
for 1 second. The Power
LED
starts blinking.
B
When the Powerline LED
on
the extender turns solid, the
pairing process is complete.
C
Extender
TL-WPA7510
within 2 minutes
Adapter
TL-PA7010
Powerline
Note: A red Powerline LED
indicates poor signal strength.
Move the extender to another location.
Relocate the extender to the Wi-Fi “dead” zone.
Use the SSID (network name) and password on
the provided Wi-Fi Info Card to connect to the
internet.
Plug the two powerline devices
into power outlets on the same
electrical circuit.
Note: It is recommended to plug in
these powerline devices next to each
other and then relocate the extender
to the desired location at step 4.
TL-WPA7510 KIT
Router
WAN
LAN
1
1000Mbps
1000Mbps
Blinking
Pair
1000Mbps
Blinking
1000Mbps
Pair
LED
Wi-Fi
On