TP-Link TL-WPA8631P KIT TL-WPA8631P KITUS V3 Quick Installation Guide

Extender

TL-WPA8631P

Adapter

TL-PA8010P

Router

LAN

WAN

1

Plug the adapter into a power outlet

and connect it to the router’s LAN

port via an Ethernet cable.

3

Connect your devices to the internet using the default SSIDs (network names)

and password on the label at the side of the extender.

Tips:

Want to unify Wi-Fi networks or personalize your networks?

See the back page for instructions.

Quick Installation Guide

TL-WPA8631P KIT

* TL-WPA8631P KIT (European version) is used for demonstration in this QIG.

* Images may differ from actual products.

2

Plug in the extender

into a power outlet on the same electrical circuit

.

Wait until the extender’s

Powerline LED

turns on.

Note:

1. If only one wall outlet is available, plug both devices into a power strip for setup, then

relocate

to wall outlets before enjoying the internet.

2. If the

extender’s Powerline LED

is off, try another wall socket, or refer to

Create a Secure

Powerline Network by Pairing

on the back page to pair the powerline devices.

Attention

2. Plug powerline devices into wall outlets instead of power strips.

Using power strip will affect network performance or even cause connection drops.

1. Use the product only in the upright direction.

Wall Outlet

Power Strip

SSID:TP-Link_XXXX

SSID:TP-Link_XXXX_5G

Wireless Password:XXXXXXXX

On