TP-Link TL-WPA8730 KIT TL-WPA8730 KITEU V1 Quick Install Guide - Page 1
TP-Link TL-WPA8730 KIT Manual
View all TP-Link TL-WPA8730 KIT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
TL-WPA8730 KIT Hello, I'm here. Follow me to extend your Wi-Fi network. Internet WAN LAN 1 Connect the adapter to a LAN port of your router using an Ethernet cable. Find the Wi-Fi Info Card in the package, then relocate the powerline extender to a wall outlet in the Wi-Fi "dead" zone. Connect to the Wi-Fi using the SSID and password on the card. * A red Powerline LED indicates poor signal strength, move the extender to another wall outlet. 2 Plug the powerline adapter into a wall outlet, then plug the powerline extender near it. Powerline Adapter TL-PA8010P * Image may differ from actual product. Extender TL-WPA8730 Wi-Fi LED Pair Pair the powerline devices. A. Press the Pair button for 1 second. The Power LED starts blinking. * If the Power LED does not blink, press it again. within 2 minutes B. Press the Pair button for 1 second. The Power LED starts blinking. When the Powerline LED is on and stable, it's done. Tips: You can add more powerline devices to the existing powerline network by pairing these devices.