TP-Link TL-WPA9610 KIT TL-WPA9610 KITEU V1 Quick Installation Guide - Page 1
TP-Link TL-WPA9610 KIT Manual
View all TP-Link TL-WPA9610 KIT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
TL-WPA9610 KIT Hello, I'm here. Follow me to extend your Wi-Fi network. Powerline Adapter TL-PA9020 (For demonstration only) Router LAN 1 WAN Extender TL-WPA9610 2 Plug the two powerline devices into power outlets on the same electrical circuit. Note: It is recommended to plug in these powerline devices next to each other and then relocate the extender to the desired location at step 4. Ethernet Cable 3 Pair the powerline devices. A Press the Pair button on the adapter for 1 second. The Power LED starts blinking. Note: If the Power LED does not blink, press the Pair button again. B Within 2 minutes, press the Pair button on the extender for 1 second. The Power LED starts blinking. C When the Powerline LED on the extender turns solid, the pairing process is complete. Blinking Adapter TL-PA9020 Pair within 2 minutes Blinking On Extender TL-WPA9610 4 Relocate the extender to the Wi-Fi "dead" zone. Use the SSID (network name) and password on the provided Wi-Fi Info Card to connect to the internet. Note: A red Powerline LED indicates poor signal strength. Move the extender to another location.