TP-Link TL-WR150KIT User Guide - Page 13
The Rear Panel, TL-WR740N/TL-WR741ND, RESET, Factory Defaults, System Tools, POWER, ON/OFF
View all TP-Link TL-WR150KIT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
1.4.2 The Rear Panel TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Figure 1-2 Rear Panel sketch The following parts are located on the rear panel (View from left to right). ¾ RESET: There are two ways to reset to the Router's factory defaults: 1) Use the Factory Defaults function on System Tools -> Factory Defaults page in the Router's Web-based Utility. 2) Use the Factory Default Reset button: Press the Reset button for five seconds and then wait for the Router to reboot. ¾ POWER: The Power socket is where you will connect the power adapter. Please use the power adapter provided with this TL-WR740N/TL-WR741ND 150Mbps Wireless N Router. ¾ ON/OFF: The switch for the power. ¾ 1,2,3,4 (LAN): These ports (1, 2, 3, 4) connect the Router to the local PC(s). ¾ WAN: This WAN port is where you will connect the DSL/cable Modem, or Ethernet. ¾ Wireless antenna: To receive and transmit the wireless data. ¾ QSS: If you have client devices, such as wireless adapters, that support Wi-Fi Protected Setup, then you can press this button to quickly establish a connection between the Router and client devices and automatically configure wireless security for your wireless network. For detailed information, please refer to 4.4 QSS. 5