TP-Link TL-WR741ND User Guide - Page 89
Time Settings, Factory Defaults, Backup & Restore, Reboot, Password - firmware upgrade
UPC - 845973051310
View all TP-Link TL-WR741ND manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Choose menu "System Tools", you can see the submenus under the main menu: Time Settings, Diagnostic, Firmware Upgrade, Factory Defaults, Backup & Restore, Reboot, Password, System Log and Statistics. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below. 4.16.1 Time Settings Choose menu "System Tools → Time Settings", you can configure the time on the following screen. Figure 4-72 Time settings ¾ Time Zone - Select your local time zone from this pull down list. ¾ Date - Enter your local date in MM/DD/YY into the right blanks. ¾ Time - Enter your local time in HH/MM/SS into the right blanks. ¾ NTP Server Prior - Enter the address for the NTP Server, then the Router will get the time from the NTP Server preferentially. In addition, for some built-in common NTP Servers, the Router can get time automatically once it connects the Internet. To configure the system manually: 1. Select your local time zone. 2. Enter date and time in the right blanks. 3. Click Save to save the configuration. To configure the system automatically: 1. Select your local time zone. 2. Enter the IP address for NTP Server Prior. 3. Click the Get GMT button to get system time from Internet if you have connected to the Internet. - 82 -