TP-Link TM-IP5600 User Guide - Page 7
Hardware Installation, Software Installation, Dial for connection to Internet - modem driver
UPC - 845973030025
View all TP-Link TM-IP5600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Chapter3 Hardware Installation The basic steps for hardware installation is as following; 1) Turn off your computer. Then open the case of your Computer. 2) Put off the metal cover on the PCI bus slot which you would like to install the modem. 3) Plug the internal modem, fasten the modem after confirming you have plugged well. Put back the case. 4) Plug one end of the phone line into LINE port on the modem. If you want to use a telephone on the same line, use the RJ11 cable attached to connect the telephone to the PHONE port of the Modem. Chapter4 Software Installation Assuming your system is windows 2000, other windows system is similar. 1) When power on your computer, Windows 2000 will detect a new hardware, PCI Device, click Next. 2) Device Driver Wizard window will appear. Choose the default option Search for the best driver for your device (Recommended) and click the Next button. 3) Choose Specify a location, Click Next. 4) Input the directory of the driver or click Browse of the driver directory of your CD driver. (The details please refer to the directory label on the CD bag.) 5) Click Next, Windows will prompt the digital-signature has not been found, Click Yes. 6) Click Finish. In Win98, the driver installation is similar to the above; you may choose the default option to finish the installation. After the installation, if there is a prompt to install "WAVE DEVICE FOR VOICE MODEM" just cancel it. Chapter5 Dial for connection to Internet 1) In Win98, please confirm that you have installed the "Dial network" in the Windows components "Communication". 2) In Win98, please confirm that you have installed TCP/IP protocol. 3) To establish Dial-connection (e.g. Win2k). a) Go into Control Panel\Network and Dial-up Connections, double-click New connection, click Next. b) Choose Dial to specified Network, click Next. c) Input the telephone number dialed, click Next. d) You may allow all users in Win2k or only you to use the connection. Click Next. e) Input the name of the Dial Connection. f) Finish. The basic configurations have been finished. You can dial to connect to the Internet. You can also click the Property in the Connection dialog box to set other configurations. 2