TRENDnet 1300 Users Guide - Page 4

TRENDnet User's Guide MIMO with Beamforming Technology Multiple Input Multiple Output (MIMO) Powerline with Beamforming technology uses live, neutral, and ground wires to increase performance between adapters. Expandable Use up to 8 adapters on a single Powerline network Easy Installation TRENDnet adapters auto-connect out of the box 128-bit AES Encryption Powerline communication is protected with 128-bit AES encryption Product Hardware Features Network Port Sync Button TPL-422E / TPL-422E2K LED Indicators Reset Button Note: * Maximum of 8 adapters (nodes) recommended for streaming video across your network. ** 1.3Gbps is the maximum theoretical Powerline data rate when connected to another Powerline 1300 device. Data throughput may vary by circuit wire conditions. *** Powerline communication works on a single electrical system. (Usually controlled by a single distribution panel). Power strip, GFCI outlets, and AFCI circuit breakers may degrade Powerline network signals. Button Sync Reset Action Press for 3 seconds Press for 15 seconds Press for 1 second Function Begins synchronization session. The POWER LED will begin to blink for 2 minutes. Press the Sync button on additional adapters within the time frame to synchronize to the powerline network. Generates a new random network name and encryption key (All LEDs will turn off and on again). Resets device to factory defaults settings (All LEDs will turn off and on again). Note: Will reset to the factory default private network name "HomePlug AV". Power Save Mode: The Powerline adapter will automatically going into standby mode to reduce power usage when there is no network traffic for more than 10~20 minutes. All LEDs are going off. It can be wake up automatically when the network traffic is coming again. It will take a couple of seconds to wake up and resume back to full speed of service. © Copyright 2018 TRENDnet. All Rights Reserved. 2