TRENDnet 14dBi Datasheet - Page 2

14dBi High Power Wireless Outdoor PoE Access Point TEW-455APBO SPECIFICATIONS Hardware Standards LED Indicator Antenna PoE EXT (50ohm) Dimension (L x W x H) Weight Power Consumption Management Wind Speed Support Waterproof Temperature Humidity Overload Current Protection Power Certification Wireless Frequency Module Technique Data Rate (auto-fallback) Security Output Power Receiving Sensitivity Channels • Wired: IEEE 802.3 (10Base-T), and IEEE 802.3u (100Base-TX) • Wireless: IEEE 802.11b/g, IEEE 802.11f IAPP, IEEE 802.11i, IEEE 802.11h, IEEE 802.11d • Power, LAN, WLAN (wireless activity) • 14dBi patch antenna, polarization, V30° H30° • RJ-45 connector for data and power support • N-Type Female connector (The TEW-ASAL1 is required for use with TRENDnet high gain antennas) • 250 x 260 x 80 mm (9.8 x 10 x 3.1 inches) • 1.6kg (3.5 lbs) • 6 Watts (Max.) • Web browser (HTTP/HTTPS), SNMP, Telnet, SSH • 210km/hr • IP66/67 compliant • Storage: -30°C ~ 85°C (-22F ~ 185F) • Operating: -30°C ~ 60°C (-22°F ~ 140°F) • 100% (Non-Condensing) • 1.1A • PoE power injector DC output: 48VDC, 0.4A • CE, FCC • 2.400 to 2.4835GHz (Industrial Scientific Medical Band) • 802.11b: CCK (11 and 5.5Mbps), DQPSK (2Mbps), DBPSK (1Mbps) • 802.11g: OFDM, 16/64-QAM • 802.11b: up to 11Mbps • 802.11g: up to 108Mbps • 64/128/152-bit WEP, WPA /WPA2-PSK, WPA/WPA2-RADIUS for AP/CPE mode, WEP/WPA2-PSK for WDS mode • MAC filter (20 entries) and IP filter (20 entries) • Up to 27dBm (FCC), 6dBm (ETSI) • 802.11b: -89dBm (typical) @ 11mpbs • 802.11g: -74dBm (typical) @ 54Mbps • 1~11 channel (FCC), 1~13 channel (ETSI) ** Effective wireless coverage may vary depending on the wireless device's output power, antenna gain, antenna alignment, receiving sensitivity, and radio interference. For optimal results, we recommended that you consult a professional installer for site survey, safety precautions, and proper installation. TEW-455APBO rev:01.15.2010