TRENDnet 14dBi Quick Installation Guide - Page 4
Hardware Installation
 |
View all TRENDnet 14dBi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
2. Hardware Installation Connecting the Grounding Wire 1. Remove the screw and washer from the grounding hole using a screwdriver. 2. Align one end of the grounding wire over the hole. Then connect the screw and washer back in. 3. Connect the green grounding wire to a grounding object. e.g. Earth Driven rod, Grounded Electrical System, Building Frame. Connecting the Ethernet Cable 1. Unscrew the sealing nut from the main body. 2. Separate the rubber seal from the claw. 3. Verify that you have the following parts: Cable Gland, Seal, Claw, Sealing Nut. 2
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
 |
 |
2. Hardware Installation
2
Connecting the Grounding Wire
Connecting the Ethernet Cable
1
. Unscrew the sealing nut from the main body.
2
.
Separate the rubber seal from the claw.
3
. Connect the green grounding wire to a
grounding object. e.g. Earth Driven rod,
Grounded Electrical System, Building Frame.
3
. Verify that you have the following parts:
Cable Gland, Seal, Claw, Sealing Nut.
1
. Remove the screw and washer from the
grounding hole using a screwdriver.
2
. Align one end of the grounding wire over the
hole.
Then connect the screw and washer
back in.