TRENDnet TE-16PNP Manual - Page 5

Before you could use an adapter in a certain networking environment, you need to install first its driver program for that type of environment. Otherwise, the adapter will not operate properly. • NetWare 2.x, 3.x, 4.x ODI driver (client and server) • Windows NT / Windows NT Advanced Server • Windows for Workgroups V.3.11 • Windows 95 • SCO Unix • NDIS Driver • Packet Driver • NBIOS Driver Aside from the drivers listed above, you may also use the NE2000 drivers on the TE-16PnP. For the installation procedure, see the README file in the driver diskette. Specifications • Complies with IEEE 802.3 10Base-2 and 10Base-T Ethernet standards • Compliant with Plug and Play ISA Specification Version 1.0a • Card configured through software program (for non-PnP systems) • Auto detection of 8-bit or 16-bit ISA bus • Diagnostics program for error tracking on board level • I/O address: 200h, 220h, 240h, 260h, 280h, 2A0h, 2C0h, 2E0h, 300h*, 320h, 340h, 360h, 380h, 3A0h, 3C0h, 3E0h • IRQ: 3*, 4, 5, 9, 10, 11, 14, 15 • Boot ROM starting address: C0000h, C40000h, C8000h, CC000h, D0000h*, D4000h, D8000h, DC000h • Boot ROM size: 8k*, 16k • Buffer RAM size: 16K bytes • Transmission distance: • UTP: 100 meters • BNC: 185 meters (without repeater), 925 meters (with repeater) • Addressable users: 1024 ( *: default value)